Daylight Pics Of Headlight Conversion
#1
Daylight Pics Of Headlight Conversion
Some of you had asked to see pictures of the 03-04 headlight conversion in the daylight and I have been too busy during the day to grab them for you. However I had time to clean of the Disco and snap a few pictures just a few moments ago.
Take in mind, the hood is popped in most of these pictures so if the alignment looks a bit off, thats why. I assure you though that they are aligned perfectly with the hood, grill, and fender.
Take in mind, the hood is popped in most of these pictures so if the alignment looks a bit off, thats why. I assure you though that they are aligned perfectly with the hood, grill, and fender.
#3
#4
RE: Daylight Pics Of Headlight Conversion
Look's good, nice job with the conversion. Look's like you just need to put the finisher's on below the light's. You can get spray touch up paint at automotivetouchup.com. They have all the Land Rover colors.
Willie
http://www.automotivetouchup.com/index.htm
Willie
http://www.automotivetouchup.com/index.htm
#5
RE: Daylight Pics Of Headlight Conversion
It's a 2000 DII, it cost me $150 for the lights. Around $200 total including small stuff and food throughout the day for everyone. They aren't necessarily 'brighter' than my old lights becuase I had a 4300k HID kit installed in them and modified it to work with these as well. However they do have a much, much better light beam pattern with them. Honestly I did the conversion for looks more than anything.
Here is the original thread AK Rover in case you want to look through it.
https://landroverforums.com/m_85242/tm.htm
Thanks Willie.[8D] and yeah, I know I need to get those on. However only one light came with a finisher, and it's silver. So I just left it off until I get my hands on another one for the other side and some paint. I've got ties with a local body shop so I'm just going to go up there, have him read the color code with his machine off of the front fenders, and mix the paint up so that they'll match perfectly.
Here is the original thread AK Rover in case you want to look through it.
https://landroverforums.com/m_85242/tm.htm
Thanks Willie.[8D] and yeah, I know I need to get those on. However only one light came with a finisher, and it's silver. So I just left it off until I get my hands on another one for the other side and some paint. I've got ties with a local body shop so I'm just going to go up there, have him read the color code with his machine off of the front fenders, and mix the paint up so that they'll match perfectly.
Thread
Thread Starter
Forum
Replies
Last Post
gmfain
General Range Rover Discussion - Archived
0
02-16-2015 09:37 AM