Discovery 2 auto to R380 manual Swap
#73
I already know I'm nuts. I know it's a lot of work. But I'm converting my 04 Discovery 2 to a manual R380 trans. The torque converter broke in the truck. Either way I have to pull the transmission. I figure might as well do a manual swap.
The main purpose of this thread is to show the trials and tribulations of a R380 swap in a D2. Lots of people asked the question what is needed to do the swap but never show the nuts and bolts of the process.
So let's get started!! I jacked the front up and put it on blocks. I followed the process shown in the free D2 repair manual to remove the Autobox.
Link here.
http://www.landroverresource.com/doc...hop_Manual.pdf
Let's keep this thread positive. Peace!
The main purpose of this thread is to show the trials and tribulations of a R380 swap in a D2. Lots of people asked the question what is needed to do the swap but never show the nuts and bolts of the process.
So let's get started!! I jacked the front up and put it on blocks. I followed the process shown in the free D2 repair manual to remove the Autobox.
Link here.
http://www.landroverresource.com/doc...hop_Manual.pdf
Let's keep this thread positive. Peace!
The R380 is a worse dog than the auto, they are very fragile on the input shaft. Take a look at the Ashcroft vid and then e-mail them.
Thread
Thread Starter
Forum
Replies
Last Post
koldstart
Retired - Private 'Wanted' Classifieds
1
10-19-2014 01:45 AM
ivankv
Retired - Private For Sale/Trade Classifieds
3
06-19-2014 02:32 PM