I'm attaching 2 picture of the engine compartment fuse box. After my crash I noticed that I was missing R14 and R6

I don't know if I even have them or not before. I went and got a fuse box with fuses intact. I replaced R14 but not sure what to do with R6. In the manual R6 is supposed to be for emission.

I have some issues developed after the accident - 3 Amigos (Code 1590) and misfiring multiple and cylinder # 2 (Code 300 and 302).

Question:

1. Can any of these issues related to these fuses?
2. R6 to R10 they are all Black and look alike. Can I use any of those R7-R10 (I have spare) on R6?

Appreciate your help.

 

Those are for options you might not have. R6 is for glow plugs or SAI. R14 is for ACE.

 

R8 is heated windscreen, do you have one?

 

I have R8 Relay. But Not sure about the R14 which I did not see i have after the accident. Yes I have R7 through R10. So R6 is for Diesel engine, right?

I assume I don't have ACE. How do I know if I have it or not?



Thank you

 

Is there an easy way to solve the 3 Amigos problem? That would be my next project.
I have read all the posts and articles on that topic. I think it's my right front sensor. Anyone knows where I can get some of these sensors? I found a lot of after market stuff through some British sites and few in US but they are 2-3X the price.

Appreciate your help guys.

 

You'll need R6 for diesels, or for petrol V8 that have secondary air injection. R8 is only needed for the heated front windscreen. If you don't have that, you can use it elsewhere.

 

Thank you I will forget about R8 and will take out R14 that I put on. I am pretty sure I don't have ACE. I am just learning since I never had to do anything on this truck before (45k mileage was stored for few years while I was working overseas.

Thanks