Discovery II Talk about the Land Rover Discovery II within.
Sponsored by:
Sponsored by:

Entire Dash Cluster not working

Thread Tools
 
Search this Thread
 
  #1  
Old 03-03-2009, 01:56 PM
tomfraser's Avatar
Rock Crawling
Thread Starter
Join Date: Nov 2008
Location:
Posts: 305
Likes: 0
Received 1 Like on 1 Post
Default Entire Dash Cluster not working

My speedometer, odometer, gas guage, trip miles, tachometer, engine temp, diff lock light, and other lights do not work

my turn signal does, and my high beams does


the connections are all good at the cluster, not sure where they go though


any ideas?
 
  #2  
Old 03-03-2009, 02:00 PM
tornado_735's Avatar
Recovery Vehicle
Join Date: Jan 2008
Location: Ohio
Posts: 854
Received 3 Likes on 3 Posts
Default

Originally Posted by tomfraser
My speedometer, odometer, gas guage, trip miles, tachometer, engine temp, diff lock light, and other lights do not work

my turn signal does, and my high beams does


the connections are all good at the cluster, not sure where they go though


any ideas?
Check the fuses. If the dash is electronic (IDK if it is) then a fuse could cause that. Had it happen to my parents car.
 
  #3  
Old 03-03-2009, 02:02 PM
tomfraser's Avatar
Rock Crawling
Thread Starter
Join Date: Nov 2008
Location:
Posts: 305
Likes: 0
Received 1 Like on 1 Post
Default

you know what I think about fuses

going to check now
 
  #4  
Old 03-03-2009, 02:06 PM
tomfraser's Avatar
Rock Crawling
Thread Starter
Join Date: Nov 2008
Location:
Posts: 305
Likes: 0
Received 1 Like on 1 Post
Default

all fuses good
 
  #5  
Old 03-03-2009, 02:13 PM
tornado_735's Avatar
Recovery Vehicle
Join Date: Jan 2008
Location: Ohio
Posts: 854
Received 3 Likes on 3 Posts
Default

Knowing those rascally british electricians, you might want to check you right rear marker light. It might have burned out and took your dash with it lol!
 
  #6  
Old 03-03-2009, 02:19 PM
tomfraser's Avatar
Rock Crawling
Thread Starter
Join Date: Nov 2008
Location:
Posts: 305
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by tornado_735
Knowing those rascally british electricians, you might want to check you right rear marker light. It might have burned out and took your dash with it lol!
lol

if anyone has any ideas please post as I have to go soon
 
  #7  
Old 03-03-2009, 02:56 PM
tomfraser's Avatar
Rock Crawling
Thread Starter
Join Date: Nov 2008
Location:
Posts: 305
Likes: 0
Received 1 Like on 1 Post
Default

going through the rave manual those things are not all on one harness, so i'm kinda nervous about this
 
  #8  
Old 03-03-2009, 03:01 PM
Rover Chris's Avatar
Recovery Vehicle
Join Date: Dec 2008
Location: Chandler,AZ
Posts: 1,175
Likes: 0
Received 9 Likes on 8 Posts
Default

are the gauges not working or the illumination on the gauges? I would check the ground in the kick, that's where they should be grounded.
 
  #9  
Old 03-03-2009, 03:43 PM
Disco Mike's Avatar
Administrator
Join Date: Apr 2006
Location: Denver, Colorado
Posts: 25,707
Likes: 0
Received 103 Likes on 85 Posts
Default

Looking at a cracked circuit board, I bet.
 
  #10  
Old 03-03-2009, 04:49 PM
tomfraser's Avatar
Rock Crawling
Thread Starter
Join Date: Nov 2008
Location:
Posts: 305
Likes: 0
Received 1 Like on 1 Post
Default

Alright... got the multimeter and tested pin 7 on connector c207, no 12v

checked for 12v at fuse 14, got it

so somewhere in between i have a problem, I think i'm just gonna run a new wire so I don't have to disassemble the dash though
 


Quick Reply: Entire Dash Cluster not working



All times are GMT -5. The time now is 12:54 AM.