Discovery II Talk about the Land Rover Discovery II within.
Sponsored by:
Sponsored by:

Expansion Tank Replacement

Thread Tools
 
Search this Thread
 
  #1  
Old 11-15-2015 | 03:06 PM
DiscoCam's Avatar
Thread Starter
|
Recovery Vehicle
Joined: Sep 2015
Posts: 820
Likes: 46
From: SF Bay, California
Default Expansion Tank Replacement

Yes I know, another coolant leak thread. But this is a Land Rover forum, so what do you expect?

Just found out that my coolant expansion tank is leaking on my D2. I don't think that the hoses attached to it are the issue because there isn't any orange crud around the ends of them. I am pretty sure that the reservoir is the problem because its underside of it is always wet with coolant. I also see coolant drips on the shock tower.

I think my only option is to replace the tank with this one: Overflow Tank : Overflow Tank Assembly

My question is this: Will the stock cap fit the non-oem unit? I just bought this cap 10k miles ago and I don't want to buy a new one if I don't have to.

Thanks.
 

Last edited by DiscoCam; 11-15-2015 at 07:20 PM.
  #2  
Old 11-15-2015 | 09:53 PM
Wilson7287's Avatar
Drifting
Joined: Sep 2013
Posts: 40
Likes: 0
Default

Originally Posted by DiscoCam
Yes I know, another coolant leak thread. But this is a Land Rover forum, so what do you expect?

Just found out that my coolant expansion tank is leaking on my D2. I don't think that the hoses attached to it are the issue because there isn't any orange crud around the ends of them. I am pretty sure that the reservoir is the problem because its underside of it is always wet with coolant. I also see coolant drips on the shock tower.

I think my only option is to replace the tank with this one: Overflow Tank : Overflow Tank Assembly

My question is this: Will the stock cap fit the non-oem unit? I just bought this cap 10k miles ago and I don't want to buy a new one if I don't have to.

Thanks.
I would get the replacement from Atlantic British and not take any chances. Also consider replacing the lines that run to the tank as well so you don't have to later and give air another opportunity to enter your cooling system
 
  #3  
Old 11-16-2015 | 02:41 AM
batard's Avatar
Rock Crawling
Joined: Oct 2015
Posts: 333
Likes: 22
Default

I'd suggest draining the system and taking out the reservoir to inspect it more thoroughly before replacing. Make sure you know the exact area of the leak and the likely cause before spending a lot of money.
 
  #4  
Old 11-16-2015 | 06:16 AM
drowssap's Avatar
Baja
Joined: Feb 2011
Posts: 9,298
Likes: 317
From: Boston Strong
Default

common problem i went with a cheap after market, which started leaking again in a couple months. I would spend the money on a good one
 
  #5  
Old 11-17-2015 | 03:22 PM
DiscoCam's Avatar
Thread Starter
|
Recovery Vehicle
Joined: Sep 2015
Posts: 820
Likes: 46
From: SF Bay, California
Default

Before I buy a new one, is there any way of fixing the old one? I can see the crack (about a half inch long). I was thinking of using a solder to melt the plastic back together or using RTV.
 
  #6  
Old 11-17-2015 | 04:18 PM
ZGPhoto's Avatar
Camel Trophy
Joined: Apr 2012
Posts: 4,533
Likes: 102
From: Burlington, VT
Default

Replace it...don't try to fix it.
 
  #7  
Old 11-17-2015 | 04:20 PM
cappedup's Avatar
Recovery Vehicle
Joined: Sep 2014
Posts: 1,155
Likes: 98
From: Putnam county. NY.
Default

It's under the same pressure your whole system is. Your fix would only just be a surface fix. It would crack again straight away I would expect.
 
  #8  
Old 11-17-2015 | 04:26 PM
mln01's Avatar
Camel Trophy
Joined: Dec 2009
Posts: 3,806
Likes: 909
From: Charlotte
Default

Where on the tank is the crack?
 
  #9  
Old 11-17-2015 | 05:43 PM
DiscoCam's Avatar
Thread Starter
|
Recovery Vehicle
Joined: Sep 2015
Posts: 820
Likes: 46
From: SF Bay, California
Default

Well the first crack I saw was in the middle of bottom of the tank (at a seam between the compartments). I found another one though.

I just got home from work (the disco is not my daily) and saw a puddle under the car (about a 2ft diameter). I saw that the tank was nearly empty and the throttle body return line had snapped at the tank. So in short, my disco is non-op for a while.

So it looks like I need a tank, tank cap, and a return line.

Looks expensive...

Thanks for all your help guys.
 

Last edited by DiscoCam; 11-17-2015 at 06:10 PM.
  #10  
Old 11-17-2015 | 06:55 PM
mln01's Avatar
Camel Trophy
Joined: Dec 2009
Posts: 3,806
Likes: 909
From: Charlotte
Default

I'm at a meeting this evening and will reply again a little later tonight, but you shouldn't need a new cap, you may not need a new tank (!), and you may, depending on your risk tolerance with respect to the throttle body heater, not need a new line either. Details to follow.
 


Quick Reply: Expansion Tank Replacement



All times are GMT -5. The time now is 02:20 AM.