My idle is really high... like 3000 rpms.. when It starts it starts decent then jumps to 3000 rpms real fast. I have replaced the maf and tps... can anybody tell me any other ideas that I might want to try. Thanks

 

Need to know if it is a DI or a DII.

 

Probably a vacuum leak. Check the vacuum lines around the intake (there are several). If you need help call me at 867-5309.

 

Hey guys thanks... Its a d1... I have checked all the vacuum hoses around the intake and have repaired all of them... Unless there are some that are hiding I think I got um...

thanks for the offer of the call. would you happen to have an area code. Thanks again

 

Also clean your t/body and lube your cable to make sure they are not causing your high idle.

 

don't you have to

 

use testbook to re-learn

 

the new TPS sometimes?

 

t4 is needed to adjust it properly, but it shouldnt cause anything that dramatic, it sounds like a sticking idle air valve to me

 

The last sentence in my previous post was a joke in reference to your user name.