When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Can you see these fotos/ this is after priming and painting >
with a 4" roller
Originally Posted by reboot
I painted my Disco 1 a few years back with Rustoleum Double Coat Almond. I sprayed first with 2 cans of primer then used a 4" roller to apply 2 good coats of
the paint. Lying on my back taking these.
Make sure you lightly sand any really rough spots or it will show through. Repair any problems while head liner is out, sun roofs motors, sun roof drains etc. If you have a rear sun roof, there's a screw under that back roof panel, pop that tab out to get to it.
I obviously need to take a pic of it installed, but I used exterior latex color matched to the seat leather. I first put on two coats of Killz primer. Then two coats of color.
Mines still looking great. The only complaint I have is the latex paint sometimes creates a "sticky" sound where it contacts some of the interior plastic pieces...but I've lived with it.
Here's a link to my thread from 12½ years ago with "lessons learned", plus a couple more recent pics and a pic of the paint can lid with the formula my local Home Depot used to match the Bahama Beige fabric.
05-04-2020, 09:12 PM
