Discovery II Talk about the Land Rover Discovery II within.
Sponsored by:
Sponsored by:

HVAC ducting diagram? (Vents not blowing enough air)

Thread Tools
 
Search this Thread
 
  #1  
Old 06-22-2020 | 05:42 PM
11chuck's Avatar
Thread Starter
|
Mudding
Joined: Dec 2019
Posts: 139
Likes: 32
Default HVAC ducting diagram? (Vents not blowing enough air)

Anyone have a diagram of the HVAC ducting particularly behind/under the dashboard? I feel as if most of the air is escaping behind the dash somewhere and want to see if there are any specific points of failure I can locate and fix.
 
  #2  
Old 06-22-2020 | 06:24 PM
boston4's Avatar
Rock Crawling
Joined: Aug 2019
Posts: 427
Likes: 138
From: Boston, MA
Default

Have you disassembled the blower motor? Often they fill up with leaves, parts of the cabin air filter, and other debris - this blocks a lot of the air. Easy to pull out and inspect:

This has instructions for removal (unless yours is making squeaking noises, you probably don't need to clean and rebuild the motor - just dump out the stuff that collects in hte cage and reach up into the ducting and pull out any other debris that's floating around.

https://landroverforums.com/forum/di...llation-55530/
 
  #3  
Old 06-22-2020 | 06:50 PM
Best4x4's Avatar
Super Moderator
Joined: Apr 2015
Posts: 7,750
Likes: 2,320
From: Beaumont, TX
Default

Lots of D1/D2's suffer from this especially in warmer climates. The foam used to seal up the flaps will completely dissolve which then allows air to circulate under the dash vs being forced out the vents.
 
  #4  
Old 06-22-2020 | 06:52 PM
Extinct's Avatar
Camel Trophy
Joined: Feb 2013
Posts: 4,633
Likes: 1,544
From: Lynchburg VA
Default

Unfortunately the Disco is designed so that the blend doors do not seal completely one region vs another. It will always bleed air to the windshield and to a certain extent to the floor vents.
 
  #5  
Old 06-23-2020 | 09:28 AM
11chuck's Avatar
Thread Starter
|
Mudding
Joined: Dec 2019
Posts: 139
Likes: 32
Default

I actually replaced the blower a while back so I know that's not the issue.

I was thinking foam had disintegrated as well and there has always been bits and pieces coming out here and there. It has spent it's whole life in the south as far as I know so always been in a warm climate.

Now the question is how do I go about fixing it? Has anyone ever tackeled this before?
 
  #6  
Old 06-23-2020 | 09:29 AM
11chuck's Avatar
Thread Starter
|
Mudding
Joined: Dec 2019
Posts: 139
Likes: 32
Default

Originally Posted by Extinct
Unfortunately the Disco is designed so that the blend doors do not seal completely one region vs another. It will always bleed air to the windshield and to a certain extent to the floor vents.
I've noticed that as well. Why would they design it that way?
 
  #7  
Old 06-23-2020 | 11:07 AM
mln01's Avatar
Camel Trophy
Joined: Dec 2009
Posts: 3,806
Likes: 909
From: Charlotte
Default

The RAVE has diagrams in the HEATING AND VENTILATION and AIR CONDITIONING sections. You can download the RAVE PDF from the link in my signature.
 
  #8  
Old 06-23-2020 | 12:36 PM
11chuck's Avatar
Thread Starter
|
Mudding
Joined: Dec 2019
Posts: 139
Likes: 32
Default

The first thing I did was look in the RAVE HVAC section, but I didn't see any diagrams pertaining the the ducting behind the dash, only under the center console. Either I missed it or it's not there.
 
  #9  
Old 06-23-2020 | 12:50 PM
Dave03S's Avatar
TReK
Joined: Nov 2011
Posts: 2,748
Likes: 505
From: Seattle, Wa
Default

Pretty sure your only option is replacing the deteriorated foam around the duct openings and vent flaps.
 
  #10  
Old 06-23-2020 | 07:24 PM
Extinct's Avatar
Camel Trophy
Joined: Feb 2013
Posts: 4,633
Likes: 1,544
From: Lynchburg VA
Default

Originally Posted by 11chuck
I've noticed that as well. Why would they design it that way?
My only guess is because it rains all the freaking time in GB and they need to keep the windshield defrosted.




 


Quick Reply: HVAC ducting diagram? (Vents not blowing enough air)



All times are GMT -5. The time now is 09:28 AM.