Leakey rear main seal, or is it?
#11
hey charlie,
I just noticed in the original post you said you didn't use any gasket maker. Does that mean you didn't put any RTV in the 4 locations the RAVE says to?
Oil pan gasket RAVE.pdf
I used RTV only in the few places the RAVE tells you to and I have the same type of leak. I am all most positive it is the oil pan gasket leaking and dripping back down to the bell housing inspection hole. I've already bought a new pan gasket and when I install it this time I am using RTV all the way around.
I just noticed in the original post you said you didn't use any gasket maker. Does that mean you didn't put any RTV in the 4 locations the RAVE says to?
Oil pan gasket RAVE.pdf
I used RTV only in the few places the RAVE tells you to and I have the same type of leak. I am all most positive it is the oil pan gasket leaking and dripping back down to the bell housing inspection hole. I've already bought a new pan gasket and when I install it this time I am using RTV all the way around.
Last edited by Jared9220; 09-20-2014 at 01:23 PM.
#12
hey charlie,
I just noticed in the original post you said you didn't use any gasket maker. Does that mean you didn't put any RTV in the 4 locations the RAVE says to?
Attachment 22719
I used RTV only in the few places the RAVE tells you to and I have the same type of leak. I am all most positive it is the oil pan gasket leaking and dripping back down to the bell housing inspection hole. I've already bought a new pan gasket and when I install it this time I am using RTV all the way around.
I just noticed in the original post you said you didn't use any gasket maker. Does that mean you didn't put any RTV in the 4 locations the RAVE says to?
Attachment 22719
I used RTV only in the few places the RAVE tells you to and I have the same type of leak. I am all most positive it is the oil pan gasket leaking and dripping back down to the bell housing inspection hole. I've already bought a new pan gasket and when I install it this time I am using RTV all the way around.
I also noticed a small leak from the housing that holds the oil filter. Does anyone know the name of that little doohickey? I'll do both at the same time.
#13
I have a spare oil pan gasket too, if it hasn't gotten ruined in the garage. Next time I change the oil I'm going to give it a try but, alas, I didn't use any RTV. I will this time and let you know how it works out.
I also noticed a small leak from the housing that holds the oil filter. Does anyone know the name of that little doohickey? I'll do both at the same time.
I also noticed a small leak from the housing that holds the oil filter. Does anyone know the name of that little doohickey? I'll do both at the same time.
The oil filter connects to the front cover. Is that what you are talking about? Is it leaking from where the oil filter mates or up from the crankshaft oil seal?
#14
I think you can probably breath a small sigh of relief since your leak is more than likely your oil pan gasket. Not using RTV in at least the 4 locations the RAVE shows it's amazing you didn't have a larger leak.
The oil filter connects to the front cover. Is that what you are talking about? Is it leaking from where the oil filter mates or up from the crankshaft oil seal?
The oil filter connects to the front cover. Is that what you are talking about? Is it leaking from where the oil filter mates or up from the crankshaft oil seal?
#15
I think I found the seal on roversnorth and the better news, it's a cheap fix. $11
O RING OIL FILTER ADAPTR DISCOVERY II V-8, RNS580, ERR7308 - Rovers North - Classic Land Rover Parts
Part number 8 in the diagram:
Discovery II Engine Oil Pump - Rovers North - Classic Land Rover Parts
O RING OIL FILTER ADAPTR DISCOVERY II V-8, RNS580, ERR7308 - Rovers North - Classic Land Rover Parts
Part number 8 in the diagram:
Discovery II Engine Oil Pump - Rovers North - Classic Land Rover Parts
Last edited by Jared9220; 09-23-2014 at 02:48 PM.
#16
I used ultra black rtv in the 4 locations and a light spear all the way around. I went light all the way around since too much will make the gasket try to slide out of place when tightening and also you don't want alot of beads of rtv to squeeze into the inside. I think it's best to let the rtv sit for a few before tightening.
I also replaced both #8 and #14 orings. Don't know if #14 was necessary but did it anyway while I was there.
So far so good.
I also replaced both #8 and #14 orings. Don't know if #14 was necessary but did it anyway while I was there.
So far so good.
#17
I used ultra black rtv in the 4 locations and a light spear all the way around. I went light all the way around since too much will make the gasket try to slide out of place when tightening and also you don't want alot of beads of rtv to squeeze into the inside. I think it's best to let the rtv sit for a few before tightening.
I also replaced both #8 and #14 orings. Don't know if #14 was necessary but did it anyway while I was there.
So far so good.
I also replaced both #8 and #14 orings. Don't know if #14 was necessary but did it anyway while I was there.
So far so good.
#18
#19