M&S lights flashing, then limp mode, then dead
#11
Alright, so finally getting around to addressing this. I attempted to start the truck and it was completely dead. After cleaning the terminals (pretty clean to begin with), I let it sit hooked up to my daily driver for 20-30 minutes. After a few tries, it finally turned over.
Still in limp mode, so I only drove around the block a few times. Ultragauge showed 14.53v.
The next day I went to drive it to my indy LR shop and it was completely dead again.
Any ideas?
Still in limp mode, so I only drove around the block a few times. Ultragauge showed 14.53v.
The next day I went to drive it to my indy LR shop and it was completely dead again.
Any ideas?
The following users liked this post:
flanker6 (12-12-2016)
#13
#14
#15
I have had those issues for at lest 2 yrs. I have tried everything. Took it to 2 different shops still not fixed. As anyone talked to someone who was able to fix the issue. Truck runs great other then that. I often wonder if the problem could involve the voltage regulator.
Thread
Thread Starter
Forum
Replies
Last Post
bcolins
Discovery II
18
06-06-2016 06:32 PM
Rickey_240
General Tech Help
7
04-02-2010 05:33 PM