Someone let us know if they are the real thing when you get
them in.
I can use a back up set at that price.

 

Just use a credit card with good customer service - and if they're not correct you can have the charge reversed.

 

Just an FYI, I ordered some this morning. Part number is 80142 for the 8MM. That is the right number for the 8MM for the D1's. We'll see...

 

I just bought my 8 mm Magnacores from roverconnection.com for $112.00 Had them 2 day later. I was able to install them without removing the intake, It took 1 1/2 hours, and was pretty easy. Now my misfiring is gone. The 2 shortest wires were for the rear sparkplugs were just a little too short to fit into the wire looms. I will have to find another way to keep them off of the valve covers.

Willie

 

That's my issue right now also willie. A couple of the wires could be a tad bit longer. The wires all the way from the tip to the end stay really hot on mine during operation anyway, so I guess the wires aremade for it.

 

Can you copy the URL and paste it here for the 8mmwires (80242)forthe Disco II. I do not see them for the $68 anywhere?

Thank you much!

 

Its on the very first thread. www.apexperformance.net

 

I know that, I am asking for the actual URL for the part number 80142, I can't find it anywhere on the site. The only one I can find is for the D1.

TIA-

 

http://www.apexperformance.net/cartg...156&cid=10

This is for the D1. It is the direct link. It lists 3 part numbers in order of the drop down menu.

The Wires for a D2 are $81.64

 

I`ll tell you what happened. Since I started this thread about the wires, the price has gone up!! They were 68.99 for the 4.0 99-04 Still cheaper than other sites. They are now 82.99 for the 8mm ones. www.apexperformance.net/cartgenie/prodInfo.asp?pid=1155&cid=10