My nipples fell off.
#11
Please. Get a few shots starting from the generalized area with reference points and work your way in with a couple of more, if you don't mind
#13
I messed up! I took out the whole tube! The second video is the fix.
Here is what I took out. That tube on the left shouldn't have been taken out.
Here is how I did it. I am not a videographer! I use a blackberry! The grease is from a driveshaft diagnosis!
Here is the fix. In the middle of this I figured out that someone had tossed my truck looking for money. I guess I have to start locking my doors.
Last edited by Charlie_V; 08-18-2015 at 07:12 AM.
The following users liked this post:
chubbs878 (08-18-2015)
#14
The two non return nipples are there for deep wading to stop water ingressing into the A/C drip tray. If you never go wading there is little point keeping them. Don't throw them away as you may find the pipe blocks up with road muck etc in any event whether wading or not. IMO I would extent them downwards with clear neoprene tubing, say about another 6" and face the outlets towards the rear of the truck with zip ties.
#15
The two non return nipples are there for deep wading to stop water ingressing into the A/C drip tray. If you never go wading there is little point keeping them. Don't throw them away as you may find the pipe blocks up with road muck etc in any event whether wading or not. IMO I would extent them downwards with clear neoprene tubing, say about another 6" and face the outlets towards the rear of the truck with zip ties.
#18
And it helps that I always have a small oil leak. Haha
Sorry about the crappy video.
Last edited by Charlie_V; 08-18-2015 at 05:45 PM.
#20
Charlie, do you have a micrometer to measure the diameter you need? I have only massaged my nipples to remove the buildup in years past, and have yet to become as masochistic as you and completely pull them off... so I am only assuming you are looking for a hose with a certain outside diameter (OD) to force up inside? Or are you looking for a hose of a certain inside diameter (ID) to fit over something?
When I read you just left a pretty good parts store, I was going to recommend when going to a parts store: Always look for the guy whose shirt is dirty, needs a shave, looks like he might have slept on a shelf in the store the night before, and appears to be perpetually disgruntled....then make a bet he can't find what you need... then I realised I was describing myself. I am that guy.
Get me measurements, and I will find a suitable hose.
When I read you just left a pretty good parts store, I was going to recommend when going to a parts store: Always look for the guy whose shirt is dirty, needs a shave, looks like he might have slept on a shelf in the store the night before, and appears to be perpetually disgruntled....then make a bet he can't find what you need... then I realised I was describing myself. I am that guy.
Get me measurements, and I will find a suitable hose.