New disco owner, sequence of mods?
#1
06-03-2011, 08:47 AM
Join Date: May 2011
Location: Colorado
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
New disco owner, sequence of mods?
I just bought a 2000 disco, with 96k miles on it. I am wondering about the sequence of my mods as I don't want to spend my money more than once.
So my understanding is the first should be
1. Front drive shaft should be changed out for a Tom woods or other high quality
after-market unit
2. Roto flex removed from rear drive shaft.
3. Then a 3" lift probable Terrafirma with shocks.
4. New tires will a 285/70/16 fit under without trimming to much?
5. Spare tire re locater needed, to make room?
Any other suggestions will be appreciated.
So my understanding is the first should be
1. Front drive shaft should be changed out for a Tom woods or other high quality
after-market unit
2. Roto flex removed from rear drive shaft.
3. Then a 3" lift probable Terrafirma with shocks.
4. New tires will a 285/70/16 fit under without trimming to much?
5. Spare tire re locater needed, to make room?
Any other suggestions will be appreciated.
Thread
Thread Starter
Forum
Replies
Last Post