Discovery II Talk about the Land Rover Discovery II within.
Sponsored by:
Sponsored by:

P0134 and P0305

Thread Tools
 
Search this Thread
 
  #11  
Old 01-06-2015, 11:36 AM
cybercop's Avatar
Recovery Vehicle
Thread Starter
Join Date: Dec 2008
Location: North Georgia
Posts: 772
Received 19 Likes on 17 Posts
Default

Originally Posted by Yoops Racing
The whiring noise is 100% normal.
the code could be because one of the mounting points came loose from the Sec Air hoses. Same thing happened to me.
Before ordering MAF and o2 sensors have you spoken to David at The Shop? You may not need these
Not yet. I planned to call John this week. I fixed the whirling sound. What mounting points are you talking about?
 
  #12  
Old 01-06-2015, 01:44 PM
OverRover's Avatar
TReK
Join Date: Feb 2013
Posts: 2,512
Received 653 Likes on 559 Posts
Default

Originally Posted by cybercop
Are these direct plug in, or do they need to be modified at the connectors? Are they just as good, if not better than the Bosch?

Just talked to Tech @ NTK and re: Amazon... they might have connectors, or not. But from authorized NTK vendors #25623 and #25624 always have the connectors.


Rockauto has them for still under $200 for 4 > $50.99 and $47.89.


Maybe someone who bought these from Amazon can give you more info.


As far as quality, I only use NTK O2 sensors/NGK Plugs on all my cars. I haven't had good results with Bosch in years.
 
  #13  
Old 01-06-2015, 01:47 PM
ROVERRACER's Avatar
4wd Low
Join Date: Jan 2015
Posts: 10
Likes: 0
Received 1 Like on 1 Post
Default Maf

I bought a used MAF sensor. Works fine.
 
The following users liked this post:
cybercop (01-06-2015)
  #14  
Old 01-06-2015, 05:43 PM
cybercop's Avatar
Recovery Vehicle
Thread Starter
Join Date: Dec 2008
Location: North Georgia
Posts: 772
Received 19 Likes on 17 Posts
Default

Originally Posted by ROVERRACER
I bought a used MAF sensor. Works fine.
So replacing the MAF sensor specifically fixed these codes?
 
  #15  
Old 01-09-2015, 09:55 PM
cybercop's Avatar
Recovery Vehicle
Thread Starter
Join Date: Dec 2008
Location: North Georgia
Posts: 772
Received 19 Likes on 17 Posts
Default

Well, problem turned out to be O2 sensor on left bank (drivers side) AND water throughout the entire secondary air system, even in the check valves.

How do you suppose water got into the secondary air system? It was even in the pump.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
smittyrc
Discovery II
1
12-23-2013 08:37 AM
RSPTex
Discovery II
3
11-24-2013 01:41 PM
jnice
Discovery II
1
06-28-2008 09:38 PM



Quick Reply: P0134 and P0305



All times are GMT -5. The time now is 07:26 PM.