Plastic Trim Piece ID
#1
#2
The following users liked this post:
FlyingZebra34 (06-06-2019)
#3
The following users liked this post:
FlyingZebra34 (06-06-2019)
#4
The following users liked this post:
FlyingZebra34 (06-06-2019)
#5
The following users liked this post:
FlyingZebra34 (06-06-2019)
#6
I found the 79090 number has been superceeded by another number that is no longer stocked. I found some suppliers that carry them for $1 a piece with shipping. Took the ACE hardware route. Took some digging but found there. 100% identical. $.20 a piece. Not bad. Thanks guys.
I've been collecting trim piece numbers and am working on a master clip set for the disco. Would be convenient seeing as every time I touch something, it breaks.
I've been collecting trim piece numbers and am working on a master clip set for the disco. Would be convenient seeing as every time I touch something, it breaks.
#8
https://www.marshallshardware.com/pr...84-13537&lid=1
https://www.hillmangroup.com/us/en/F...th%29/p/400169
here it is
https://www.hillmangroup.com/us/en/F...th%29/p/400169
here it is
Last edited by HunterdonCounty; 10-15-2020 at 09:46 AM.
#9
#10
Gotcha.
make a few measurements and pick closest from here
https://www.clipsandfasteners.com/Nuts-Nylon-s/126.htm
make a few measurements and pick closest from here
https://www.clipsandfasteners.com/Nuts-Nylon-s/126.htm