Plugs/Wires done. Thinking of skipping Seafoam
#1
Plugs/Wires done. Thinking of skipping Seafoam
Well, the new plugs and wires are in (+4s and Mag's 8mm), and I'm concerned about fouling the plugs if I *now* do the induction cleaning.
There is a barely noticeable, slightly rough idle (only when warm) so I wanted to do the induction cleaning, but not sure I want to replace plugs again. Or would I only have to clean them?
I'm considering not doing it at all. Other than what I mentioned, the car is running great (great power - even on heavier load, no clicking, no oil leaks, no coolant leaks, etc.)
Would you do the induction cleaning (I have 94K now) or just skip it till/if it really starts to idle rough?
-Anthony
There is a barely noticeable, slightly rough idle (only when warm) so I wanted to do the induction cleaning, but not sure I want to replace plugs again. Or would I only have to clean them?
I'm considering not doing it at all. Other than what I mentioned, the car is running great (great power - even on heavier load, no clicking, no oil leaks, no coolant leaks, etc.)
Would you do the induction cleaning (I have 94K now) or just skip it till/if it really starts to idle rough?
-Anthony
#3
#4
what for? i tore down route 1 thru Rye Ny and into Greenwich Ct on Friday after i did the same for a friends truck. its more fun watching people in their porsche's and Benz stop and stare in a state of fright.
#6
-Anthony
#8
#10