Discovery II Talk about the Land Rover Discovery II within.
Sponsored by:
Sponsored by:

Post- Head Gasket

Thread Tools
 
Search this Thread
 
Old Mar 17, 2008 | 04:24 PM
  #31  
kraelo's Avatar
Thread Starter
|
Mudding
Joined: Feb 2008
Posts: 112
Likes: 2
Default RE: Post- Head Gasket

Yah, I replaced the hoses as soon as I found them.

Drove it again last nite and I think either A) thermostat is opening slow or B) air bubble is massive ...

C) Air bubble is massive and I have internal leak sustaining the airbubble, is why I can't bleed it out successfully. ..

I found a 94 motor that runs great for $350 or one with head gasket (haha irony) problem for $200 ...

but they are about 500 miles away from me ...
 
Reply
Old Mar 17, 2008 | 05:22 PM
  #32  
okdiscoguy's Avatar
Camel Trophy
Joined: Feb 2007
Posts: 4,959
Likes: 11
From: Tulsa, OK
Default RE: Post- Head Gasket

Those are cheap.
 
Reply
Old Mar 17, 2008 | 05:24 PM
  #33  
kraelo's Avatar
Thread Starter
|
Mudding
Joined: Feb 2008
Posts: 112
Likes: 2
Default RE: Post- Head Gasket

I bought a power steering pump and gearbox for $50 each with warranty too :P
 
Reply
Old Mar 17, 2008 | 05:25 PM
  #34  
okdiscoguy's Avatar
Camel Trophy
Joined: Feb 2007
Posts: 4,959
Likes: 11
From: Tulsa, OK
Default RE: Post- Head Gasket

A gearbox with no play will bring $200 easy....
 
Reply
Old Mar 17, 2008 | 05:28 PM
  #35  
kraelo's Avatar
Thread Starter
|
Mudding
Joined: Feb 2008
Posts: 112
Likes: 2
Default RE: Post- Head Gasket

Brand new pumps I found around $500 and same with gearbox ...

Only 'new' part is gonna be a pressure hose :P


Hell my motor is blowing up, power steering is out, brand new tires and wheels, immaculant interior, new sound system ..

guess all i have left is to burn up the tranny and rebuild it (i laugh to keep from crying)
 
Reply
Old Mar 18, 2008 | 09:09 PM
  #36  
kraelo's Avatar
Thread Starter
|
Mudding
Joined: Feb 2008
Posts: 112
Likes: 2
Default RE: Post- Head Gasket

What is that can looking thing with the black hose on top of the valve cover ?

 
Reply
Old Mar 18, 2008 | 09:31 PM
  #37  
okdiscoguy's Avatar
Camel Trophy
Joined: Feb 2007
Posts: 4,959
Likes: 11
From: Tulsa, OK
Default RE: Post- Head Gasket

The can is an oil separator and the hose goes to your intake hoe right? It is used to burn off positive crankase vent gasses. Emissions thing. If it leaks air in, it will make your idle rumble..
 
Reply
Old Mar 18, 2008 | 09:45 PM
  #38  
kraelo's Avatar
Thread Starter
|
Mudding
Joined: Feb 2008
Posts: 112
Likes: 2
Default RE: Post- Head Gasket

Could the water pump be going the wrong direction ?

anyone have a belt routing diagram for a 95 disco 3.9 ?
 
Reply
Old Mar 18, 2008 | 09:48 PM
  #39  
okdiscoguy's Avatar
Camel Trophy
Joined: Feb 2007
Posts: 4,959
Likes: 11
From: Tulsa, OK
Default RE: Post- Head Gasket

why do you ask? I am checking now.....
 
Reply
Old Mar 18, 2008 | 09:57 PM
  #40  
okdiscoguy's Avatar
Camel Trophy
Joined: Feb 2007
Posts: 4,959
Likes: 11
From: Tulsa, OK
Default RE: Post- Head Gasket

does it look like this?

[IMG]local://upfiles/5440/426F615D7C894E288732A14A8BDAF514.jpg[/IMG]

[IMG]local://upfiles/5440/4D97F0FADBDC4172A962946970774F5A.jpg[/IMG]
 
Reply



All times are GMT -5. The time now is 04:41 PM.