Radiator Follow up
Thread Starter
|
Three Wheeling
Joined: Nov 2007
Posts: 82
Likes: 0
From: South East-PA
Radiator Follow up
To follow up on my post earlier this month pertaining to my 98 D1 Overheating problem, I should have my brand new Radiator delivery from AB some time tomorrow. And Boy I'm soooooo glad that I don't have to sit on that lump in my wallet anymore. It was down right burning a hole in my leather seats 
...
While I have it drained and apart (I hope for last time until spring) I will also be changing the all the Water & Oil Cooler hoses as we'll.
Should I use Teflon tape on the Oil Cooler hose threads?
... While I have it drained and apart (I hope for last time until spring) I will also be changing the all the Water & Oil Cooler hoses as we'll.
Should I use Teflon tape on the Oil Cooler hose threads?
Last edited by Jrock; Aug 31, 2009 at 12:50 PM.
Recovery Vehicle
Joined: Aug 2006
Posts: 1,002
Likes: 2
From: Colorado Springs, CO
You shouldn't need to. I did the same job and as long as you get them in nice and snug they will seal just fine with the supplied o-rings.
CAREFUL: Be sure you thread them in properly. You do not want to strip those connections...
CAREFUL: Be sure you thread them in properly. You do not want to strip those connections...
Thread
Thread Starter
Forum
Replies
Last Post