Radio S 1 FOR message
#1
Radio no sound S 1 FOR message
So i'm trying to troubleshoot a radio issue, have power to radio but no sound.
I have replaced radio with known good,
Checked Fuses in interior panel 2 fuses were fine.
swapped with a known good amplifer from another rover,
swapped rear passenger headphone modules.
Message on radio says "S 1 FOR" which I get find any info in manuals, forums or online.
Also audio works fine when plugging in headphone jacks in rear passenger area but I get no sound thru rest of vehicle.
99 Discovery II, SE7 model.
I know there an AMP under the seat which I swapped with another, Are there any other amps', fuses or modules I need to check or swap?
I have replaced radio with known good,
Checked Fuses in interior panel 2 fuses were fine.
swapped with a known good amplifer from another rover,
swapped rear passenger headphone modules.
Message on radio says "S 1 FOR" which I get find any info in manuals, forums or online.
Also audio works fine when plugging in headphone jacks in rear passenger area but I get no sound thru rest of vehicle.
99 Discovery II, SE7 model.
I know there an AMP under the seat which I swapped with another, Are there any other amps', fuses or modules I need to check or swap?
Last edited by harrjd; 04-17-2019 at 05:36 PM.
#2
Thread
Thread Starter
Forum
Replies
Last Post