RAVE is not helping me with timing chain....help please?!?
#11
SuperSport - thank you for the illustration - very helpful! And I wish you were closer, too - I'd pay you what I paid Avis for my rental car for your help, gladly! And throw in beer and pizza for good measure.
I estimate if I get the timing chain done in under an hour, which should be possible for most people (but seemingly not this noob!) then I have a few hours of assembly, fluid filling and such til I'm done!
Regardless, I have the week to review posts, RAVE, videos, whatever - as I am putting in some long days at the office due to calling out a few days because of me truck. I won't even be thinking about trying to finish my project til Friday night...and I rented a car thru Monday, allowing me the whole weekend to do it, and the ability to run to LR and/or auto parts store if necessary....
Please, if anyone has any helpful info to add, keep adding. It seems I have plenty to learn :-)
And one last question (ok, last for now....) should I change spark plugs? Is there a benefit? I figure since I'm learning where they are/what they do/ and taking out at least one, maybe I should? Or maybe there is no reason to?
As always, much thanks to all of you for your invaluable help and patience!
I estimate if I get the timing chain done in under an hour, which should be possible for most people (but seemingly not this noob!) then I have a few hours of assembly, fluid filling and such til I'm done!
Regardless, I have the week to review posts, RAVE, videos, whatever - as I am putting in some long days at the office due to calling out a few days because of me truck. I won't even be thinking about trying to finish my project til Friday night...and I rented a car thru Monday, allowing me the whole weekend to do it, and the ability to run to LR and/or auto parts store if necessary....
Please, if anyone has any helpful info to add, keep adding. It seems I have plenty to learn :-)
And one last question (ok, last for now....) should I change spark plugs? Is there a benefit? I figure since I'm learning where they are/what they do/ and taking out at least one, maybe I should? Or maybe there is no reason to?
As always, much thanks to all of you for your invaluable help and patience!
#12
#13
#14
I limped it home, and with the help of the RAVE and my limited knowledge, traced it back to what I thought was the water pump. Asked questions, received help, ordered from Atlantic British. My water pump was fine, but the gasket looked pretty deteriorated. Put it back together, and almost cried when it started leaking from what now appeared to be (with a little more knowledge) my timing chain cover.
Soooo... I dove in. Pretty much out of necessity, it's my only car. (sold my "extra" car a few months back when I was in a cash crunch - and am still in it, which is why I can't just call LR or a mechanic!)
Have been seeking advice, instructions since. And was advised to buy timing chain kit as my truck has 120k on it, and I would be in there anyway. So I did.
And then I spent the better part of this past weekend cursing and/or totally frustrated when I hit road block after road block of seemingly easy issues. Like putting the pry bar on the wrong side to "bump" the engine. Getting enough leverage (I'm "petite"...ok, really short) to release the serpentine belt..... A milk crate is my new best friend!
I've learned a lot along the way. Including my DII may be a pita, but I'd prefer it any day over the Nissan Altima I rented this morning :-)
Lucky for me, everyone keeps jumping in with help. Pointing out little things that may be obvious to most - not to me. Like to take the spark plugs out to do the timing chain....which by the way, had me cursing out Magilla Gorilla, every LR engineer that ever walked the face of the planet, my "stupid hands" and more!! LOL
And that's how I ended up doing my timing chain without knowing what a spark plug was!
#15
Haha, That's great! I've spent countless hours wishing I could have a word or two with the engineers at LR, especially the guy that put the coil packs where they are!! Which is why I asked the miles. Although I agree with drowssap about changing the plugs while you are in there, if you're at 120k you need to do the wires as well. Magnacor 8mm spark plug wires. But those wires are a little over $100 and Bosh Platinum #4 plugs are $6 each. If Money is tight that is a project you can delay, no urgency to do it now while doing the chain. But add it to your list of priorities. Also check out Disco Mike's Major Service List at the top of this forum.
#16
#18
You can save yourself some money and put on Kingsborne Wires. I have been running them for over 2 years with the Bosch +4 spark plugs and love them. You can order directly for $35 and free shipping.
IGN 790 Kingsborne Spark Plug Wires Ignition Wire Set - Kingsborne Ignition Spark Plug Wires Sets made in the USA
IGN 790 Kingsborne Spark Plug Wires Ignition Wire Set - Kingsborne Ignition Spark Plug Wires Sets made in the USA
#19
Again, totally impressed.
#20
x2 on the
IGN 790 Kingsborne Spark Plug Wires Ignition Wire Set - Kingsborne Ignition Spark Plug Wires Sets made in the USA
same yourself a ton of money I just put a set on my p-38 and the look the just fine
IGN 790 Kingsborne Spark Plug Wires Ignition Wire Set - Kingsborne Ignition Spark Plug Wires Sets made in the USA
same yourself a ton of money I just put a set on my p-38 and the look the just fine