Share your measurements
#1
![Default](https://landroverforums.com/forum/images/icons/icon1.gif)
I wanted to start a thread of lift measurements for various suspensions and variables. If you do not have a photo, please note the extra weight you may have(sliders, bumpers, rack) and please note what suspension set up you're running. I think this will give people an idea of what kind of lift they're interested in.
![Name: ZTDA177.jpg
Views: 319
Size: 180.8 KB](https://landroverforums.com/forum/attachments/discovery-ii-18/57235d1683051267-share-your-measurements-ztda177.jpg)
#2
![Default](https://landroverforums.com/forum/images/icons/icon1.gif)
I didn't take this picture special for this post, and my measurements are from a few months ago, because I don't have the disco with me at work, but I'm at 21.5 in the front and 22 in the back, the last time I measured, if I did it accurately. My tires are 255/85R16, if you need that info for comparing wheel well gap in another photo.
#3
#6
#8
![Default](https://landroverforums.com/forum/images/icons/icon1.gif)
Great thread.
I have a used (had 50k miles when I got it) 2" OME HD lift.
265/65/r18 BFG A/Ts with about 50% thread
ARB and 9k lb. winch on front
SD rack
Normally run an Engil fridge in the rear, but it was out when the measurements were taken (i'm building a platform and drawer for the rear)
Full tank of fuel.
I think I got most of the mud off the bottom from the last two weeks, so the measurements are probably accurate.
The odd part is the front looks so much lower... i was thinking of putting 1" spacers in there...
I have a used (had 50k miles when I got it) 2" OME HD lift.
265/65/r18 BFG A/Ts with about 50% thread
ARB and 9k lb. winch on front
SD rack
Normally run an Engil fridge in the rear, but it was out when the measurements were taken (i'm building a platform and drawer for the rear)
Full tank of fuel.
I think I got most of the mud off the bottom from the last two weeks, so the measurements are probably accurate.
The odd part is the front looks so much lower... i was thinking of putting 1" spacers in there...
#9
#10
![Default](https://landroverforums.com/forum/images/icons/icon1.gif)
Would it be the shocks or the springs?