What doesn’t work in your DII?
Recovery Vehicle
Joined: Dec 2016
Posts: 1,174
Likes: 467
Rear sunroof is the last thing. Once we finish the world map material on the headliner and get in installed, I’ll replace the assembly (something is broken). Otherwise, ACE, rear air bags, rear AC, cruise control, windows, locks, defrosters, heated seats, stereo, lumbar for both seats, condenser fan, headlight washers, all lights, and probably a few I’m forgetting all work.
Oh shoot, I’ve still got to do Option B for the Amigos from time to time. Oh well.
Oh shoot, I’ve still got to do Option B for the Amigos from time to time. Oh well.
Thread Starter
|
Three Wheeling
Joined: Oct 2018
Posts: 55
Likes: 5
From: Arizona
Rear sunroof is the last thing. Once we finish the world map material on the headliner and get in installed, I’ll replace the assembly (something is broken). Otherwise, ACE, rear air bags, rear AC, cruise control, windows, locks, defrosters, heated seats, stereo, lumbar for both seats, condenser fan, headlight washers, all lights, and probably a few I’m forgetting all work.
Oh shoot, I’ve still got to do Option B for the Amigos from time to time. Oh well.
Oh shoot, I’ve still got to do Option B for the Amigos from time to time. Oh well.
Camel Trophy
Joined: Nov 2015
Posts: 3,560
Likes: 834
From: Staten Island, NY
Pretty much everything on my project truck works really well, especially the automatic undercarriage rust inhibitor dispenser (AKA a massive oil leak from the front crankshaft seal).
Pro Wrench
Joined: May 2016
Posts: 1,617
Likes: 184
From: Lake Tahoe
In pretty good shape here
Fixing a rear spring sagging issue soon
Only other thing I can't seem to figure out is burning oil (no leaks, compression perfect), and really tough to climb freeway grades @ 60+mph
Fixing a rear spring sagging issue soon
Only other thing I can't seem to figure out is burning oil (no leaks, compression perfect), and really tough to climb freeway grades @ 60+mph
Camel Trophy
Joined: Oct 2016
Posts: 4,865
Likes: 1,408
From: Michigan
Jeff, have you ever had your heads machined and resealed (valve seals)?
Brian.
Pro Wrench
Joined: May 2016
Posts: 1,617
Likes: 184
From: Lake Tahoe
Yeah when I rebuilt the engine it was decked, and a $450 3-angle valve job done, with new seals. Same guy installed my flanged sleeves. Maybe a seal is leaking? No noticeable oil in the exhaust or pistons