Windshield/A-Pillar Cover Help

Reply Subscribe

Thread Tools

Search this Thread

Nov 25, 2009 | 02:42 PM

#11

heromanLSU

Three Wheeling

Joined: Jul 2008

Posts: 84

Likes: 0

Mine flew off on the interstate a few months back! I got some new rivets from the hardware store that were identical to the stock ones.

Mar 5, 2011 | 05:20 PM

#12

brooksa

Rock Crawling

Joined: Dec 2007

Posts: 356

Likes: 0

From: Gainesville, GA

Quote:

Originally Posted by Urban Panzer

Or you can cheat,

Drill a very small hole in the centre pin of the rivets, then screw in a tiny self tapping screw, then yank on the screw with a pair of needle nose pliers, you can then re-use the old ones then

Thanks UP, I did your trick and worked for the drivers side but I got the passenger side on and the rivet holes wernt lined up so when I pulled it off I broke 2 of the tabs on the finisher so I will get another and try again, thanks again for the tip!