Wiper balde refill
Three Wheeling
Joined: Mar 2009
Posts: 74
Likes: 0
From: Fort Worth, TX
You can't buy made to fit wiper blades for the Disco II in regular auto stores. At least I've never found any. I just buy replacement blades that are long enough for a few bucks and cut them to fit with a pair of dykes. Look it over, you'll figure it out.
Thats why some people buy DI wiper arms, then you can buy your blades anywhere.
Rock Crawling
Joined: Apr 2009
Posts: 377
Likes: 4
From: Chicago, IL
That's exactly it, so much easier than hassling for a DI wipers.
I think 16", 13" for the rear but either a 14" or 12" will work as 13" is a odd size.
But double check the book.
Three Wheeling
Joined: Aug 2009
Posts: 81
Likes: 0
From: Charlotte, NC
I got 21" fronts and a 14" rear. Amazingly, Wal-Mart had every size of the triple edges except for 21", they didn't even have a spot on the hanger for 21"! I'll keep looking around, almost went with the rain-x because my current ones are SHOT, but I'm going to hold out.
Rock Crawling
Joined: Feb 2008
Posts: 306
Likes: 0
From:
Yes these Triple-Edge blades are THAT good.
I have the Rain X Euro blades on my work van, only blades they had in stock last winter and they SUCK, I even wrote a letter to Rain X and got no response.
They freeze up and ice over in less than 20 min and i have to clean them off every stop or two.
The Tripe Edge blades do not do that, and they wipe so clean it is amazing.
I have them on the front and rear of my Disco.
I have the Rain X Euro blades on my work van, only blades they had in stock last winter and they SUCK, I even wrote a letter to Rain X and got no response.
They freeze up and ice over in less than 20 min and i have to clean them off every stop or two.
The Tripe Edge blades do not do that, and they wipe so clean it is amazing.
I have them on the front and rear of my Disco.