Does anyone have a diagram or directions on what pins to apply 12V too, to test the operation of the door lock actuators?

I ordered two "used" actuators from RL Parts and neither worked upon arrival. I have the actuators in my hand, I'm trying to bench test them, but am unsure which pins to apply 12V too? Thanks.

 

Okay, By performing a little reverse engineering on my Old "extra" actuator I have determined that pin outputs 7 & 8 feed one motor (w/ the grey gear) and pin outputs 7 & 4 feed the other motor (w/ white gear).

 

The bench test is concluded. Its been determined that both units shipped out we're bad on arrival. It happens, no biggie. What do expect when ordering used parts.

Anywho, I contacted Robert at RoverLand Parts and described in detail my bench test findings, without hesitation he apologized and immediately sent out another two actuators.

I just wanted to thank Robert and RoverLand Parts for their excellent service, I would highly recommend them.