Good afternoon,

I have my LR Discovery Sport with standard mechanic seats (LHD car), now I got all seats from RHD (heated, electric). I have managed to find out pins to enable electric part, I think (didn't tested yet), I know what is the pin to enable heating, but I'm missing some pins.

Driver seat has 3 sensors: 1 is to make sure that belt is fastened, one is attached to the seat rail / lath (bottom, on the right side for RHD) itelf (somebody can tell what kind of sensor is it?, just curious) and last one is probably Airbag SRS (going into back of the seat), 2/3 cable were moved there.
Passenger seat has also 3 sensors, but instead if the sensor that is attached to the rail / lath of the seat, it has some sensor in the middle of seat itself, one is going to the back of the seat (like driver) and another one for belt. I've moved here only belt sensor.

Now, I'm looking for the electric diagram of the pins / seats to understand how to move (adjust to current one) rest of the sensors. I would be appreciated if some one can share.

Thank you a lot.

P.S. Sorry for my English, not a native speaker.

 

Have seat heater diagram, that's it - from Discovery I

Disco I Seat Heater Wiring Diagram

 

Good morning

Thank you a lot, but I found real one from LR Discovery Sport Workshop Manual. Replacement is more less simple if somebody want to do same, with some knowledge about electrical circuits it can be easy replaced. Power exist on fuse, just some cables missed.

 

Sorry for revive this old question.....Could you share with me the pinout wiring to add from the car in order to get the electric seats working....I have manual seats and I got electrics seats from a ds donant...my wiring loom don't include power...and when I swap the driver seat, seat belts, and airbag works fine...i need to incluye earth and power.....I don't figure wich one cables to adjust