If anyone who has a 1993 RRC 3.9L could please do me a favor. I found a wire hanging (actually 2) and can't find where they should be connected. If you could this wire comes out of a group of wires on the passenger side of the intake. It goes down the front of the motor and splits. One section of this goes to the oil sensor located where the oil filter screws on, and the other section (well thats the one I need help on). Two wires go into a connector (about 1/2" in diameter) and then two wires come out of the connector (this connector has "Rists" stamped on both sides. So if someone could, trace the wire from the oil sensor to the split and please let me know what the wire should be attached to.

Thanks for the help.