Engine repair or replacement
#11
RE: Engine repair or replacement
Thank you for the reply,
I just got a quote from my mechanic, 1100 $ labor and 800 $ parts + cylinder heads cleaned and checked + 12 months/ 12000 miles warranty.
That's probably a fair deal. I hope I will not have any additionnal parts to replace.
Thanks for your interest and help.
I just got a quote from my mechanic, 1100 $ labor and 800 $ parts + cylinder heads cleaned and checked + 12 months/ 12000 miles warranty.
That's probably a fair deal. I hope I will not have any additionnal parts to replace.
Thanks for your interest and help.
#12
#14
Join Date: Apr 2006
Location: Denver, Colorado
Posts: 25,707
Likes: 0
Received 103 Likes
on
85 Posts
RE: Engine repair or replacement
ORIGINAL: ptschram
Given a 0.002" acceptable variation of a cylinder head, unless one scrupulously cleans the mating surfaces, enough gasket crud will remain to make using a straight edge silly.
When I remove a pair of cylinder heads, they go to my machinist to be cleaned and measured using the dial indicators on his resurfacing machine, thus being certain of accurate and precise measuring, to a level beyond a visual inspection using a straight edge.
I've never had a come back on cylinder head work. I do not know a dealership tech who can say the same.
Yes, I've been criticized for this attitude, but results speak loudly. I do not want to have to repeat the job on my dime because I failed to have work done by someone who is better setup to do the work than I-and I have a Brown & Sharpe straight edge, yet I trust my machinist's resurfacing machine more than I trust my eyesight and straight edge.
Before you comment that my machinist has a vested interest, I've been using him for nearly 30 years and he has plenty of work that he does not need work that isn't necessary.
Given a 0.002" acceptable variation of a cylinder head, unless one scrupulously cleans the mating surfaces, enough gasket crud will remain to make using a straight edge silly.
When I remove a pair of cylinder heads, they go to my machinist to be cleaned and measured using the dial indicators on his resurfacing machine, thus being certain of accurate and precise measuring, to a level beyond a visual inspection using a straight edge.
I've never had a come back on cylinder head work. I do not know a dealership tech who can say the same.
Yes, I've been criticized for this attitude, but results speak loudly. I do not want to have to repeat the job on my dime because I failed to have work done by someone who is better setup to do the work than I-and I have a Brown & Sharpe straight edge, yet I trust my machinist's resurfacing machine more than I trust my eyesight and straight edge.
Before you comment that my machinist has a vested interest, I've been using him for nearly 30 years and he has plenty of work that he does not need work that isn't necessary.
#15
Join Date: Apr 2006
Location: Denver, Colorado
Posts: 25,707
Likes: 0
Received 103 Likes
on
85 Posts
RE: Engine repair or replacement
ORIGINAL: discoland
Thank you for the reply,
I just got a quote from my mechanic, 1100 $ labor and 800 $ parts + cylinder heads cleaned and checked + 12 months/ 12000 miles warranty.
That's probably a fair deal. I hope I will not have any additionnal parts to replace.
Thanks for your interest and help.
Thank you for the reply,
I just got a quote from my mechanic, 1100 $ labor and 800 $ parts + cylinder heads cleaned and checked + 12 months/ 12000 miles warranty.
That's probably a fair deal. I hope I will not have any additionnal parts to replace.
Thanks for your interest and help.
His labor rate is very fare.
#16
RE: Engine repair or replacement
The head gasket set is $ 562.50, the oil + filter $ 16, thermostat $ 56, antifreeze $ 34, heads resurfacing $ 95, power flush cooling system $ 61, head gasket set, plenum gasket + head bolts installation $ 1092. I was a little high on the parts this morning, I didn't have the estimate with me.
#17
Join Date: Apr 2006
Location: Denver, Colorado
Posts: 25,707
Likes: 0
Received 103 Likes
on
85 Posts
RE: Engine repair or replacement
That ios where they are getting you, the a Rover head gasket set and head bolts thru Atlantic British is around $250, t/stat about $18, and power flushing is a joke when you can do it at home for about $15 when you do your next oil change.
Something to think about.
Something to think about.
Thread
Thread Starter
Forum
Replies
Last Post
TennesseeRover
Discovery I
11
03-19-2014 08:16 AM
seniordon
Discovery II
10
01-17-2011 06:45 PM