General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

No Blinkers/Hazards on 1996 Discovery II

Thread Tools
 
Search this Thread
 
  #1  
Old 11-27-2008, 10:43 AM
kcklein's Avatar
3rd Gear
Thread Starter
Join Date: Nov 2008
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default No Blinkers/Hazards on 1996 Discovery II

About a week ago my blinkers/hazard lights stopped working. They still flash when I turn the alarm on. All my fuses seem to be working. I can hear and feel the click when I push the lever. It's just that nothing happens when I turn the signal. There's also no signal indicator on the dash either. Any ideas?
 
  #2  
Old 11-27-2008, 11:14 AM
hazletbassist89's Avatar
Recovery Vehicle
Join Date: Feb 2008
Location: Hazlet, NJ
Posts: 939
Likes: 0
Received 0 Likes on 0 Posts
Default RE: No Blinkers/Hazards on 1996 Discovery II

Welcome to the forum Sounds like a grounding problem. I'm not positive on that but it couldn't hurt to go through and check those grounds and clean them up a little.

Also 96 is a Discovery I. DIIs started in mid 99 :P
 
  #3  
Old 12-30-2008, 12:05 PM
zoomlenz4u's Avatar
Drifting
Join Date: May 2008
Location: Imperial, Ca
Posts: 26
Likes: 0
Received 0 Likes on 0 Posts
Default RE: No Blinkers/Hazards on 1996 Discovery II

I had a similiar issue. Luckly I was able to fix the problem with a couple of fuses.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
berkster
General Tech Help
0
12-27-2010 09:52 AM
JimScream
Discovery II
7
11-29-2008 02:09 PM
Rover Reaver
Discovery II
16
11-02-2008 12:23 PM
rka12321
General Tech Help
1
04-19-2008 01:44 PM
rlhunter
Discovery II
3
01-27-2007 05:09 PM



Quick Reply: No Blinkers/Hazards on 1996 Discovery II



All times are GMT -5. The time now is 07:43 PM.