Since we were involved in a minor accident and have to replace the front bumper I was thinking of replacing it with an ARB bumper. Does anyone know if you can modify it to accept the front park sensors? Also any pics of one installed?

 

I'm not sure....but aren't front park sensors more of a nuisance than an aid?

 

would only be a matter of cutting the holes, as long as there is clearance and the bumpers not to thick imo

 

I recently acquired a 2007 LR3 HSE with a front winch. None of the front park sensors are working. The outside pair seem to be unobstructed but the inside pair is covered by the rubber bumper.

I have a GAP IIDTool BT- I'm wondering if the car configuration file could be changed to make only the two outside sensors active. For those of you who have experience with the front park sensors-- do you think this would be valuable?

Thanks!

 

If you follow this link and scroll down the page, there is a video (picture complilation) of a white 2008 LR3 with the ARB bumper installed.

http://www.jaguarwillowgrove.com/blo...mber/index.htm

And I found this photo too for you...

http://i721.photobucket.com/albums/w...ps21ddb485.jpg