So, my turn to draw the leak straw...elbow rotted out at the firewall and of course we had a couple inches of rain yesterday. Pulled the panels and carpet and am drying it all out, but have a quesion.

So truck ran fine yesterday, but today its running very rough and got an "engine underpowered" warning on the dash. No error codes were picked up when i scanned with the GAP. Passenger side is bone dry

Guessing its the wiring needing to dry out, but assuming something got fried, what systems/ECMs are in the kick panel? I can see the EAS module there, but not sure what else is up there. Also have a new brake switch coming in to replace it for piece if mind.


Thanks