my 05 lr3
1 Attachment(s)
New vehicle new thread
05 lr3 se 50k miles sitting since 2009, needs a little body work but clean to reflect the miles Pic before I mess with it Attachment 37383 |
Lots done today
I swapped the silver grill with the dark grey from the 06, swapped in the hid projection headlights from the 06 Installed running boards from 06 Installed the 3rd row seats from 06 with the rear side impact airbags Swapped lower tailgate Hood shocks Heavy rubber mat set from 06 |
4 Attachment(s)
Pics of stripped out rear interior and rear side impact airbags
Attachment 37379 Attachment 37380 Attachment 37381 Attachment 37382 |
The vehicle was pre wired for the 3rd row air bags, all the holes are there to add the 3rd row seats,
not pre wired for satillite radio antenna pod ( I don't care ), not pre wired for parking assist, or front off road lights, not pre wired for the d pillar speakers or all those aux radio jacks we did not want So basicly the se model is more what we wanted with just a few items off the hse I also will not be adding rear a/c, I have pics of the 06 hse stripped out if anyone needs to see what's there |
got the tail light stone guards installed from the 06, swapped the 18" rims with dry rotted tires for the 19" rims with good tires
got the brush guard pulled off the 06 |
got the brush bumper swapped over, found I have a pinion leak on rear diff and was missing a driveshaft bolt, pulled the rear bumper cover to swap it and saw how bad the bumper was under it and reinstalled the bad cover for now
btw are those big ass weights on the back of the frame really necessary? |
Those big ass things are harmonies balancers or resonators and help with chassis vibrations and torsional movement while driving, so don't get rid of it yet...
|
2 Attachment(s)
|
That looks great Tom! The dark grill looks much better on the silver truck.
|
Thanks, that bar is a dealer option, the tech I know installed quite a few so he's gonna help me pull the harness for those lights and reinstall in mine
Funny thing is the silver grill looks fine on the dark grey 06 Adding the rear curtain airbags has turned on the airbag lite He tried to reset the lite but it comes back, the lr3 ecm is telling his laptop additional airbags detected and it cannot seem to be reset, tried reprogramming but it would not take We have a slight high speed vibration he thinks is nothing And a noise in the back we are thinking is the park brake shoes making noise like dragging some on rust from sitting, I got to get on a lift to be sure |
The 05 is not pre wired for park assist
It is pre wired for the 3rd from airbags, and 12 v power socket at the back on the drivers side, it is also pre wired for the driving lights in the bumper, the bumper has the brackets and there is a outline on the inside where to cut, I was going to do this but my dremel broke Even though I have the additional off road package and the nav shows an unlocked padlock in the center and in the back I do not appear to have the rear locking diff best we can tell, I have a big ass spare but it is on a steel rim not aluminum like the HD comes with |
Wow, with the headlights did you have to do anything special? Are they the headlights that swivel when you turn?. We're the third row seats difficult to install?
|
3rd row was a day taking apart 2 vehicles and reassemble both but I also added the airbags which has turned on the airbag lite, rover tech tried a reset and reprogram to get rid of it but no luck
You need to drive in the seat bolts with an impact gun the holes are there but unthreaded and the bolts are self threading, don't forget the seat belts Now the airbag lite has a chance of being turned off but the tech would have to take it to work and call rover engineering for the master unlock for my vin and I would have to pay dealer price for that The headlights simple plug in, they do not appear to move |
Will you consider taking the third row airbags out? Or is there enough value there to have the dealer set the computer? I didn't realize the 3rd row would bolt in, that's good to know for future purposes!
Also, this isn't going to replace the D1 I hope.. |
Nope this is wife's new dd
If I can't get the lite out I may just unplug them, the computer actually tells him they are not supposed to be there |
With the computer denying their existence, would try even deploy in an accident?
|
Originally Posted by taylor15
(Post 484958)
With the computer denying their existence, would try even deploy in an accident?
|
No the fault just states the extra airbags are detected, there see no sensor faults
|
Got the rear steel bumpers pulled off both and welded the good one on the 05
Found that both the big vibration weights were unbolted laying on the frame guess they were not doing much except making noise |
2 Attachment(s)
Here's some pics, 05 was hit in rear in 2009 on carfax this was under the bumper skin, other pic is the 06 with bumper removed, this was not as hard as I thought, the frame and bumper are only 1/8" steel it is a frigging joke
Attachment 37325 Attachment 37326 |
3 Attachment(s)
Attachment 37322
06 bumper removed Rear bumper top view Attachment 37323 Rear frame vibration damper with bracket Attachment 37324 |
This is why you run a vin check guy wanted 10k for this 50k mile 05 I ran a carfax on the spot showed him and crawled under saw the damage and pointed it out, he knew it and was not gonna tell me, this made it a $5k rover
The 06 I ran a vin check it was fine no reported wrecks If I did not have the 06 sitting here she could have drove it how it was I am just ocd on car stuff and want it to be right, sucks neither came with the hitch although the 05 bumper would have fell off lol |
2 Attachment(s)
Pic of bumper welded on and finished product properly resembled
Now if I want we can get a hitch adapter and tow, also now no worries of being rear ended with an already crushed bumper Attachment 37316 Attachment 37317 |
Link to repair for remote wiring
https://landroverforums.com/forum/lr...working-69580/ Fixed that and blew out the pass side hvac drain just in case it was clogged Now need to figure out the radio and nav cutting out nav is a new issue radio was very intermittentnow no sound at all |
serviced rear diff it is humming and leaking from pinion seal, oil was contaminated, blew out vent line refilled with royal purple max gear 75w/90, no locker
sucks at 50k miles it already has a bad rear diff serviced front rear, oil was clean and new, no leaks refilled with the royal purple max gear 75w/90 2 qts seemed to fill em both serviced transfer case fluid looked pretty clean, 1.5 qts royal purple synchromax replaced transmission mount, it was broken and looks like it was that way for a loooong time Air pump bracket broken so got that changed out, pump looks brand new guess the box works well, now pump is super quiet barely hear it running |
1 Attachment(s)
|
Got the park brake shoes replaced and adjusted, drivers side had no lining just the metal shoes and they were dragging on the drum, my buddies put it in service mode and all is adjusted
Think I have the nav fixed,, tried swap out the disc, then the nav computer, and finally the screen Screen seemed to fix it, guess I will know in a few days if it's fixed radio has now decided it wants to work lol |
well got the driveshaft heat shield installed , it was missing
added 2nd row heated seat buttons, just need to swap the seat this is prewired added the console refrigerator, also prewired added the puddle lamps on the bottom of the 4 doors, also pre wired just cut the door panels |
1 Attachment(s)
fridge install
ok this is easy to do block wheels put shifter in neutral, pull up and twist on shifter handle it pops off there is a screw in front of the park brake lever, it can be Phillips or torx, remove it flip open console lid, remove the rubber mat under the ashtray area now grab and pull up the top of the console on the sides where the top and bottom halves meet it is hard to remove but will come off you can now lift it high enough to get past the shifter stalk and rotate it clockwise 90* , the wiring is tight so be careful, I unplugged it all to get the cover off all the way there are 3 plugs; park brake, shift lights, off road selector ( this one was hard to remove had to use a screwdriver to ease it out) now there are 2 screws in the front one on each side at front of the glove box ( see pic) next put both front seats forward, take a torx remove both console lid hinge bolts, and the hinge caps ( see pic) now grab the cubby box and pull up hard it has clips on bottom last locate the fridge plug, it will have a piece of foam wrapped around it, drop in the fridge and reverse procedure Attachment 37093 |
1 Attachment(s)
pic remove screws and caps for lid hinges, that hole in the fridge flange is for the factory satellite radio
Attachment 37092 |
1 Attachment(s)
|
1 Attachment(s)
empty console
see the grey foam near the driver seat belt that the plug just ditch the foam and untape it from the harness to get slack Attachment 37090 |
1 Attachment(s)
now if you want to remove the rear panel on the console this is the time to do it since the cubby hides this screw, unscrew it and pull straight back on the rear panel it will come off
the plugs are under there for the rear heated seat buttons they are green but covered in foam Attachment 37089 |
1 Attachment(s)
installed with the coin tray installed and turned on, it takes a second or so for the switch to light up, I also think it only works with engine running gets real cold real fast few minutes maybe
Attachment 37088 |
1 Attachment(s)
adding the puddle /entry lights easy but takes some time since you have to remove all 4 door panels
see the indent in bottom of panels Attachment 37087 |
1 Attachment(s)
|
1 Attachment(s)
|
1 Attachment(s)
here is the light
Attachment 37084 |
1 Attachment(s)
|
1 Attachment(s)
|
All times are GMT -5. The time now is 08:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands