Not new to Land Rovers. I have had a Disco I, Disco II, and now the proud owner of an LR3. It's a lot different that my fist two. Managed to mess up the calibration for the suspension on the first try. The previous owner had installed 2;5" lift rods. I had one side wheel that was set lower that the other and decided to re-calibrate. Wasn't even thinking about the lift rods. It errored out during calibration and is now stuck with the red suspension light on and no calibration in the module. I do not have a set of stock rods and will probably fashion some just to get the calibration done so I can get back on the road. I will then source some stock rods. Can anyone tell me what the stock rod length is from center to center? Thanks