2006 LR3 HSE part out
#1
Moderators: Please delete the thread. I have tried on my own but the button is not here to delete in the edit section. Glitch?
Last edited by 4thefamily; 08-10-2015 at 10:32 AM. Reason: Trying to delete post
#5
Well I don't really need the front ones but I guess if the price was low enough I might pull the trigger anyway. Still interested in the cross bars if you find you have them.
See you have a Saab too. We got my son a 9-3 when his Volvo S60 was visited by a hail storm.
See you have a Saab too. We got my son a 9-3 when his Volvo S60 was visited by a hail storm.
#6
Thanks for the heads up on the Saab. I only run synthetic oil in my vehicles to lessen the sludge problem. The 2.0 turbo in the Saab is a really great engine. Mechanically his car is fine. Of course it has some of the normal Saab electrical gremlins. Only thing that looks bad is that the paint has really failed on the hood, roof in front of the moon roof and along the upper rear quarter panel. Getting ready to give him a Lexus IS250 for college graduation so I'm not sure whether we'll put any money into painting the Saab.
We loved the S60. It was just the regular non-turbo engine but still had plenty of pep. Only thing I didn't like about it was that it was very light in the rear and it had a tendency to hop if you hit a bump during a cornering move. Other than that was a great car. Always wanted to have an S60 R but never got the chance.
Didn't see the cross bars so I wasn't holding out a lot of hope that you had them.
We loved the S60. It was just the regular non-turbo engine but still had plenty of pep. Only thing I didn't like about it was that it was very light in the rear and it had a tendency to hop if you hit a bump during a cornering move. Other than that was a great car. Always wanted to have an S60 R but never got the chance.
Didn't see the cross bars so I wasn't holding out a lot of hope that you had them.
#8
PM sent. Thanx
#10
I'm interested in the sunroof ECU and the transfer case ECU behind and under the battery. I also need a couple of the bolts that fit the rear license plate light plastic to the truck as well as the screws holding the rear black plastic on the lower tailgate. (The plastic that is on the inside and then curves over the tip of the lower gate..there are 3-4 screws there.