D2 Center Console Plate w/ Switch Bezel - ON SALE
Thread Starter
|
Mudding
Joined: Jul 2006
Posts: 185
Likes: 15
Its the same material but its textured. It costs a little more because we have to align the patterns, they cant just be cut however they fit best, so we get less per volume of material.
Here's the link and two images, you can see in the close-up that it has little oval patterns.
Trek Series Boot for Transfer Case Shifter ? blacklisted engineering
Here's the link and two images, you can see in the close-up that it has little oval patterns.
Trek Series Boot for Transfer Case Shifter ? blacklisted engineering
Last edited by badfysh; Feb 19, 2015 at 06:31 PM. Reason: add pictures
Thread Starter
|
Mudding
Joined: Jul 2006
Posts: 185
Likes: 15
Got the D1 in house yesterday. It'll be here for a few weeks while we get a product line sorted.
1. Diff guards with integrated pinion guard - front and rear
2. Rear bolt on shock mount for extended shocks
3. Radius arms
4. Console plate
5. Engine mounts
6. Adjustable rear A-arm
and more...feel free to throw some suggestions our way. we really are trying to develop as many products as we can. mostly ones that don't exist or are sub-standard.
Let us know....
joe@blacklistedengineering
facebook.com/blacklistedengineering
@blacklistedengineering
1. Diff guards with integrated pinion guard - front and rear
2. Rear bolt on shock mount for extended shocks
3. Radius arms
4. Console plate
5. Engine mounts
6. Adjustable rear A-arm
and more...feel free to throw some suggestions our way. we really are trying to develop as many products as we can. mostly ones that don't exist or are sub-standard.
Let us know....
joe@blacklistedengineering
facebook.com/blacklistedengineering
@blacklistedengineering
Camel Trophy
Joined: Nov 2009
Posts: 4,079
Likes: 227
From: IL
Got the D1 in house yesterday. It'll be here for a few weeks while we get a product line sorted.
1. Diff guards with integrated pinion guard - front and rear
2. Rear bolt on shock mount for extended shocks
3. Radius arms
4. Console plate
5. Engine mounts
6. Adjustable rear A-arm
and more...feel free to throw some suggestions our way. we really are trying to develop as many products as we can. mostly ones that don't exist or are sub-standard.
Let us know....
joe@blacklistedengineering
facebook.com/blacklistedengineering
@blacklistedengineering
1. Diff guards with integrated pinion guard - front and rear
2. Rear bolt on shock mount for extended shocks
3. Radius arms
4. Console plate
5. Engine mounts
6. Adjustable rear A-arm
and more...feel free to throw some suggestions our way. we really are trying to develop as many products as we can. mostly ones that don't exist or are sub-standard.
Let us know....
joe@blacklistedengineering
facebook.com/blacklistedengineering
@blacklistedengineering
Interested in THESE for a D1. I have the RTE A-arm spacer, but always wished it was adjustable somehow. The RTE pushes it almost too far back, making it difficult to get the geometry right to run a standard non-DC driveshaft.
Thread Starter
|
Mudding
Joined: Jul 2006
Posts: 185
Likes: 15
We're working on it. Thanks for your patience. FYI, we have a 3 week lead time once I approve the prototype for production. This includes going out for anodize and marking, waiting for hardware etc.
Please also keep in mind we won't accept any money or list an item for sale until we actually have the inventory. Too many companies aren't meeting their responsibilities int his area and we will NOT be in that group.
Please also keep in mind we won't accept any money or list an item for sale until we actually have the inventory. Too many companies aren't meeting their responsibilities int his area and we will NOT be in that group.
