As the title states, I'm selling a full, 4-corner, 6 caliper upgrade kit that I drew up/fabbed over the summer. I made two kits, one of which I'm keeping. The other is here for sale, and consists of the following:

• 4-piston monoblock front calipers (Advics)
• 4-piston rear calipers (Wilwood)
• Single piston Brembo/Tesla electric parking brake (with factory harness for plug-n-play operability)
• 360/350mm front/rear high carbon dimpled rotors with electro-coated finish
• EBC Redstuff ceramic pads (I have GreenStuff as well, and a new set of OE/BP-10 pads should you have a preference)
• Russell stainless DOT lines and fittings
• Chromoly adapters with 10.9 fasteners

Additional features:

• Fits inside OE 19" wheels
• Custom stainless pins and bleeders (for a cohesive look throughout as well as eliminating the need to pound out any pins in order to change pads - simply thread them out and swap the pads). And of course, rust should be minimal.
• Brake torque up ~35% overall (assuming constant friction coefficient to OE pads) with about a 12% increase in demand at the master cylinder
• Front/rear bias within ~5% of OE
• Front pad type is standard Brembo F40/F50, and rears are Wilwood Dynalite shape (both of which are common and come in any compound one would want.

In short, I saw the lack of aftermarket for this chassis as a good reason to get creative. The package is legit.

Bottom line: SOLD

 

Set #2 - Loire Blue Pearl ...

 

Have some interest, but no takers. Here's a few shots of another set mounted and tested. (And currently working a treat).

 

Messaged

 

sold.