I have the complete shift linkage assembly from a Series I Discovery for sale. Included are all the parts from the shift **** down to the nut securing the linkage to the nipple.

$150 shipped in the continental US

If you have a DII with a transfer case that has a nipple you can use this linkage as well. In fact, for an additional $25 I'll include the hi/lo cover to help make lining up the linkage a breeze.

So you have a DII LT230 without a nipple? Don't have CDL? For $75 including shipping, I can send you the front output assembly off a DI transfer case. Install it and you now can use your truck the way it was meant to be used.

Have a line on a low mileage DII transfer case for your DI but are concerned about hooking up the VSS. I have the rear output assembly from a DI so you can use that newer DII case. $95 including shipping.

paulgrant@mac.com
classicroverparts@gmail.com
203-770-1699
http://stores.ebay.com/Classic-Rovers

 

Sale pending on the hi/lo cover.

 

How much for an entire Discovery I transfer case with the linkage still intact?

Do you have a DI transmission available?

Thanks.

 

Complete transfer cases with the linkage are $400 plus shipping. Figure somewhere in the neighborhood of $100 to get a complete case to you in PA.

As far as transmissions are concerned, I only have DII units right now. I am expecting another DI in later next week and can let you know about the condition of that transmission if you would like. I typically get between $250 and $400 for transmissions depending on their mileage, history and condition.
Cheers,
Paul

 

Front output assembly has been sold.

I do have another CDL switch available for $35 shipped anywhere in the US. Here are photos of what I have.