Parting out a 1998 Discovery
I still have the complete leather seats (power + heated) it was an LSE.
I have most of the interior except for the door panels.
I have the HVAC system
I have a 4.0 V8 with 92,000 miles on it and it runs perfect!
I have the chassis
I have a complete set of wheels in decent shape no tires.
I have the alternator and the air-conditioning compressor
And Finally I have a complete set of brakes.
All parts are in good shape and located in Erie Colorado (near Boulder)
I have most of the interior except for the door panels.
I have the HVAC system
I have a 4.0 V8 with 92,000 miles on it and it runs perfect!
I have the chassis
I have a complete set of wheels in decent shape no tires.
I have the alternator and the air-conditioning compressor
And Finally I have a complete set of brakes.
All parts are in good shape and located in Erie Colorado (near Boulder)
Do you still have the covers that go under the drivers and passengers seats? I am referring to the covers that come out, and the entire plastic shrouds that cover the front seat mechanisms.
Hello,
I am looking for a complete tcase diff lock shifter assembly. If you have one please email me back at ninoavent@aol.com
Thanks,
Nino
I am looking for a complete tcase diff lock shifter assembly. If you have one please email me back at ninoavent@aol.com
Thanks,
Nino
I am interested in the alternator and the heater control unit(if you still have it) and the center dash panel around the radio and heater control unit.
If you want, pm me with your phone number and I will call you back.
Scot McMillin
Columbus, Ohio
If you want, pm me with your phone number and I will call you back.
Scot McMillin
Columbus, Ohio
Will the front passenger door fit on a 2000 discoII? If so, I would like to buy it if you have it. I got hit by some careless ***** and now I need a new door.
Can you get the plug that goes into the back of the stock radio? The PO had an aftermarket head unit installed and the plug was hacked instead of using an adapter. I want to get it back to stock and then I'll get the adapter from Crutchfield. I'm looking for the plug and as much length you can get so it can be soldered back onto the wiring harness.


