WTB 04 D2 airbox lid
Well I had a spare 4.0L MAF housing so yep the actual sensor drops right in. So if you get the intake tube, MAF housing, and the lid from a 4.0L it is 100% PNP. Lower airbox is the same & it uses the same filter.
4.0L lid is slightly stronger as it’s not as thin as the 4.6L units. I’ve seen them broken before yes, but vs a 4.6L = no comparison.
4.0L lid is slightly stronger as it’s not as thin as the 4.6L units. I’ve seen them broken before yes, but vs a 4.6L = no comparison.


