Ok thanks

heres what I have going on for the rear doors so far. Then the plan is to put a molle panel over the plastic. Simple and will last a lifetime

probsbyl going to do something similar for the fronts

also progress shot of the double din mod

 

Perfect fit!

 

Clamp test fit...pass

total weight: sub + end cap + pvc tube x2 = 38 pounds.

 

That looks awesome! Thick enough to bolt into?

Side note... Is that a dewalt pocket knife? I didn't even know they made such a thing. Is it any good?

 

Oh yeah, it's schedule 80 pipe, 1/2" thick. I have a couple parts that I'm experimenting with to reinforce the tube. I found a good place to through-bolt a u-bolt using the sunroof frame. I also have a 3/8" threaded rod that I thought I'd attach to a pipe clamp and mount it horizontally, providing front-to-back support.

Yes its dewalt, folding. Sharp as **** and very durable (all metal). $10 I think at home depot

 

China built with your choice of name names?
.......

 

you join a 7 page long thread just to contribute that?
.........

 

Pods are looking fiiine

hesvy though. We shall see how the bar fares tomorrow

pvc cement the end caps, then a paint job and she's ready

should I put a thing inside the tube, like poly fil?

 

Test fit

Im going to remove the master lock switch and clock and relocate my Auber gauges to that spot. For the right coin tray I will put the ultragauge. For the left, a 3 switch cruise control module from a D1.




Finishing up the woofers

 

Money