OEM Brush/Light Guards
#11
#12
Wow- were you able to locate one of these? It’s exactly what I have been looking for!!!!!
QUOTE=Paulodelson;632172]Was sent this so fingers crossed that the old duff selling the guard has the right one. And again oem D1 accessories are way tougher to find then lwt parts!
thank you all![/QUOTE]
QUOTE=Paulodelson;632172]Was sent this so fingers crossed that the old duff selling the guard has the right one. And again oem D1 accessories are way tougher to find then lwt parts!
thank you all![/QUOTE]
#14
Same, mine is rusting from the inside out as well. I have no earthly idea why they chose to cap off the tubes on the bottom. My PO plasti-dipped the whole thing, which seems to have at least masked the problem. I had no idea these things were so hard to get a hold of... At some point I should probably strip it, grind off the rust, bondo and repaint.
#16
That's exactly what my buddy and I are doing now. Mine has the infamous rot, so we're making one out of pretty thick tubing, along with a lower profile front bumper. Trying to get it to be burly and OE looking. I'll make a thread with progress eventually.
The following users liked this post:
jimvw57 (05-14-2018)
#17
#18
#19
#20