L8 is looking for a few volunteers to help us with our next big video. We are going to compare the new L8 LR3 against a similarly built D1, D2, and if we can find one, LR4. If you would like to help us out and also be in our video, then please let us know if you and your truck meet the following requirements.

First, you must be attending SCARR 2014 in Texas.
Second, your truck needs to be lifted between 2 and 3 inches.
Third, you need to have M/T tires that are 32 inches in diameter.

If you have a truck that meets these guidelines and would like to help us out, please email us today at Sales@lucky8llc.com.

 

Anybody running 32's on 3" of lift is a fool.

 

Any reason why you say this? Or just not your flavor?

 

Perhaps my words were harsh. And I was just kidding.....well kinda.
3" of lift is about double what you need to run 32's on a D1 and certainly on a D2. Ideally you want the least amount of lift necessary to run the largest tire possible while accounting for suspension travel. So basically a 3" lift is overkill for 32" tires.
And 32's tend to look a little silly on 3" lift.