Land Rover Forums - Land Rover Enthusiast Forum
0 2020/01/30 11:07:37
0 2020/02/05 19:31:00
0 2020/02/07 12:23:38
Remove front cover.
Remove front cover.
0 2020/02/15 23:35:11
Remove the knob for the volume dial.
Remove the knob for the volume dial.
0 2020/02/15 23:35:18
Remove screws holding the front cover (one on each side).
Remove screws holding the front cover (one on each side).
0 2020/02/15 23:35:25
0 2020/02/15 23:35:31
Bend the four metal strips, holding the front part.
Bend the four metal strips, holding the front part.
0 2020/02/15 23:35:39
Gently pray off the front part with small screw driver.
Gently pray off the front part with small screw driver.
0 2020/02/15 23:35:45
Hole behind the left tail light for the 12V connection between battery isolator and 2nd battery (the second hole is not required, I use it as for an external 12V plug powered by the 2nd battery).
Hole behind the left tail light for the 12V connection between battery isolator and 2nd battery (the second hole is not required, I use it as for an external 12V plug powered by the 2nd battery).
0 2020/05/13 12:47:04
Battery box in the trunk, secured with steel cables. 4 USB ports on the right side (optional).
Battery box in the trunk, secured with steel cables. 4 USB ports on the right side (optional).
0 2020/05/13 12:47:14
View from the otherside with Anderson connectort and 12V outlet (blue plug).
View from the otherside with Anderson connectort and 12V outlet (blue plug).
0 2020/05/13 12:47:21
Battery isolator in the jack compartment.
Battery isolator in the jack compartment.
0 2020/05/13 13:03:31
12 V tapped at the main battery (there is already a bolt + thread for it).
12 V tapped at the main battery (there is already a bolt + thread for it).
0 2020/05/13 13:03:40
0 2020/05/20 19:07:23
0 2020/05/21 17:49:12
0 2020/05/21 17:49:19
0 2020/05/21 17:49:29
0 2020/05/21 17:49:39
0 2020/05/21 17:49:48
0 2020/05/21 17:49:57
0 2020/05/21 17:50:06
0 2020/05/21 17:50:14
0 2020/06/20 17:27:56
0 2020/06/20 17:28:05
0 2020/06/20 17:28:12
0 2020/07/10 19:13:02
0 2020/09/22 12:20:14
0 2020/09/25 12:04:21
0 2020/09/25 12:04:30
0 2020/09/25 12:04:39
0 2020/10/24 22:23:33
0 2020/11/11 12:35:08
After the MC removed, corrosion on the booster visible.
After the MC removed, corrosion on the booster visible.
0 2020/11/30 20:43:08
Removed the rust with a Dremel, the yellow plastic cap from the defective MC used as cover.
Removed the rust with a Dremel, the yellow plastic cap from the defective MC used as cover.
0 2020/11/30 20:43:14
Primed ...
Primed ...
0 2020/11/30 20:43:19
... and painted.
... and painted.
0 2020/11/30 20:43:25
After installation of the new MC bench bleeding with the help of plastic and rubber hose pieces. You can pump the paddle while sitting in the seat. You can see the clear hoses through the gap between hood and windshield cowl. Keep the clear plastic lines as short as possible and submerge the other ends into the brake fluid of the completely filled reservoir. Otherwise you will not get the bubbles out of the line and suck them in again. It took quite a while to get all the bubbles out.
After installation of the new MC bench bleeding with the help of plastic and rubber hose pieces. You can pump the paddle while sitting in the seat. You can see the clear hoses through the gap between hood and windshield cowl. Keep the clear plastic lines as short as possible and submerge the other ends into the brake fluid of the completely filled reservoir. Otherwise you will not get the bubbles out of the line and suck them in again. It took quite a while to get all the bubbles out.
0 2020/11/30 20:43:30
After the traditional bleeding I did the "HDC bleeding" and at last a power bleeding with the self made kit above. Take the ABS relay out, bridge the ABS relay, open bleeder screw, let it flow until clean and no bubbles, close bleeder screw (ignition off).
After the traditional bleeding I did the "HDC bleeding" and at last a power bleeding with the self made kit above. Take the ABS relay out, bridge the ABS relay, open bleeder screw, let it flow until clean and no bubbles, close bleeder screw (ignition off).
0 2020/11/30 20:43:35
0 2020/12/21 22:28:04