Land Rover Forums - Land Rover Enthusiast Forum
18 ft lbs and locktite 290 on the int. shaft lock
18 ft lbs and locktite 290 on the int. shaft lock
0 2020/06/03 16:31:15
Hardest part, go SLOWLY!
Hardest part, go SLOWLY!
0 2020/06/03 16:31:18
~ 1.8Nm
~ 1.8Nm
0 2020/06/03 16:31:19
0 2020/06/03 16:52:03
0 2020/06/03 16:52:04
0 2020/06/07 18:23:15
0 2020/06/08 14:35:13
0 2020/06/08 14:36:04
0 2020/06/08 14:37:10
0 2020/06/08 17:26:32
0 2020/06/08 17:26:34
0 2020/06/08 17:26:36
0 2020/06/08 17:26:38
0 2020/06/08 17:57:59
0 2020/06/12 12:46:58
0 2020/06/12 12:47:23
0 2020/06/12 12:47:38
0 2020/06/12 12:49:59
0 2020/06/17 09:52:54
0 2020/06/17 10:28:47
0 2020/06/17 16:00:35
0 2020/06/17 16:07:33
0 2020/06/17 16:19:58
0 2020/06/17 16:20:00
0 2020/06/17 16:20:01
0 2020/06/17 16:20:03
0 2020/06/17 17:40:41
Pry the connector off the mount with a short lever. The connector came apart easily. Press tab on harness part of connector.
Pry the connector off the mount with a short lever. The connector came apart easily. Press tab on harness part of connector.
0 2020/06/18 07:45:47
heat shield. dangling CPS wire .
heat shield. dangling CPS wire .
0 2020/06/18 07:45:49
New on left. Not good on right.
New on left. Not good on right.
0 2020/06/18 07:45:51
0 2020/06/18 07:45:52
F'n hard to get this back into the mount. Looks easy but ..........
F'n hard to get this back into the mount. Looks easy but ..........
0 2020/06/18 07:45:54
0 2020/06/19 12:45:02
Trimmed the body metal at rear of T-case. I will add a few welds and some silicone sealer ....
Trimmed the body metal at rear of T-case. I will add a few welds and some silicone sealer ....
0 2020/06/20 13:32:00
0 2020/06/20 13:32:03
Guide stud and 'snugging' bolt.
Guide stud and 'snugging' bolt.
0 2020/06/20 13:32:05
Damn! It's finally in!
Damn! It's finally in!
0 2020/06/20 13:32:06
0 2020/06/20 16:26:36
0 2020/06/24 05:43:47
0 2020/06/24 05:44:03