Land Rover Forums - Land Rover Enthusiast Forum
All the way down the side
All the way down the side
0 2020/07/15 14:39:12
You can see where the safari rack was mounted
You can see where the safari rack was mounted
0 2020/07/15 14:39:28
Cracks in the seam sealer
Cracks in the seam sealer
0 2020/07/15 14:39:44
0 2020/07/15 14:40:11
Down at the end by the cargo for
Down at the end by the cargo for
0 2020/07/15 14:40:27
Front edge up by windshield
Front edge up by windshield
0 2020/07/15 14:40:47
0 2020/07/15 14:41:15
0 2020/07/26 11:03:13
0 2020/07/26 11:03:15
0 2020/08/07 15:14:58
0 2020/08/10 06:37:21
0 2020/08/11 21:49:11
0 2020/08/11 21:50:09
0 2020/08/11 21:54:26
Drivers Side (LHD US)
Drivers Side (LHD US)
0 2020/08/11 21:55:04
Passenger Side (LHD US)
Passenger Side (LHD US)
0 2020/08/11 21:55:51
Marking hinges for placement. Hood is perfectly aligned and hoping it stays that way.
Marking hinges for placement. Hood is perfectly aligned and hoping it stays that way.
0 2020/08/11 21:58:49
Marked hinges on top
Marked hinges on top
0 2020/08/11 21:59:31
And on both sides with little marks
And on both sides with little marks
0 2020/08/11 21:59:37
After removing bolts
After removing bolts
0 2020/08/11 21:59:44
Hood about 8 inches forward. Laying on engine. Towel under to protect grill from latch.
Hood about 8 inches forward. Laying on engine. Towel under to protect grill from latch.
0 2020/08/11 22:00:35
0 2020/08/11 22:02:50
0 2020/08/11 22:02:57
This seal was missing on mine, replaced w/ used
This seal was missing on mine, replaced w/ used
0 2020/08/11 22:03:49
0 2020/08/11 22:06:04
It has an adhesive strip which isn't totally needed but it helps hold it to the cowl while you install it. LH is marked LH and RH is marked RH btw underneath in the rubber.
It has an adhesive strip which isn't totally needed but it helps hold it to the cowl while you install it. LH is marked LH and RH is marked RH btw underneath in the rubber.
0 2020/08/11 22:08:48
0 2020/08/11 22:09:54
0 2020/08/11 22:11:31
I love new black plastic bits
I love new black plastic bits
0 2020/08/11 22:14:48
This is where the washer and clip go. Washer between metal and cowl (underneath what you see here)
This is where the washer and clip go. Washer between metal and cowl (underneath what you see here)
0 2020/08/11 22:14:53
Wala! Cowl in.
Wala! Cowl in.
0 2020/08/11 22:16:19
Wiper arms on!
Wiper arms on!
0 2020/08/11 22:16:25
Drivers side. I did A pillar first. So, I just cut off the bottom of the rain gutter piece and slid it on. It should be rain gutter piece, then A pillar.
Drivers side. I did A pillar first. So, I just cut off the bottom of the rain gutter piece and slid it on. It should be rain gutter piece, then A pillar.
0 2020/08/11 22:21:44
Did it correctly on this side.
Did it correctly on this side.
0 2020/08/11 22:22:47
Here you can see the rain gutter removed. Why, I don't know. I should have had it back on. I forgot.
Here you can see the rain gutter removed. Why, I don't know. I should have had it back on. I forgot.
0 2020/08/11 22:23:49
Almost done, just the passenger A Pillar to go.
Almost done, just the passenger A Pillar to go.
0 2020/08/11 22:25:49
FINISHED !
FINISHED !
0 2020/08/11 22:25:55
0 2020/08/12 21:38:02
265/60/R18 is bit more rugged on a stocker truck like this, but not crazy
265/60/R18 is bit more rugged on a stocker truck like this, but not crazy
0 2020/08/13 20:42:59
Love the sidewalls. The shop didn't scuff wheels and they used inside weights.
Love the sidewalls. The shop didn't scuff wheels and they used inside weights.
0 2020/08/13 20:43:06