Land Rover Forums - Land Rover Enthusiast Forum
This is what I found water was running straight into the Air intake and behind the glove box.
This is what I found water was running straight into the Air intake and behind the glove box.
0 2021/06/27 02:44:23
Air Intake is it supposed to have a cover ?
Air Intake is it supposed to have a cover ?
0 2021/06/27 03:06:04
0 2021/06/28 11:26:12
0 2021/06/28 11:26:28
0 2021/06/28 22:32:38
0 2021/07/06 13:36:54
See the water
See the water
0 2021/07/06 13:37:19
0 2021/07/06 13:37:38
0 2021/07/06 13:38:06
0 2021/07/06 13:38:28
As you can see where my finger is that’s roughly where the water is sitting on the inside.
As you can see where my finger is that’s roughly where the water is sitting on the inside.
0 2021/07/09 09:57:10
0 2021/07/09 14:43:38
0 2021/11/20 08:14:16
I’m assuming these are the screws that hold the lamp in place ?
I’m assuming these are the screws that hold the lamp in place ?
0 2022/01/02 06:33:54
This is the driver side looking up to the roof bar bolt.
This is the driver side looking up to the roof bar bolt.
0 2022/03/10 15:28:35
0 2022/03/10 15:28:41
0 2022/03/10 15:28:58
0 2022/03/10 15:30:03
0 2022/03/10 15:30:23
0 2022/03/10 15:30:42
0 2022/03/10 15:30:57
0 2022/03/12 00:00:14
0 2022/03/12 00:00:20
0 2022/03/12 00:00:29
0 2022/03/12 00:00:39
Where the water sits roughly on the inside of the vehicle.
Where the water sits roughly on the inside of the vehicle.
0 2022/03/12 00:00:45
0 2022/03/12 00:02:13
0 2022/03/12 00:02:24
0 2024/02/01 10:16:25
0 2024/02/01 10:33:35
This fitting is ok as the female lug is big enough to go over the male.
This fitting is ok as the female lug is big enough to go over the male.
0 2024/02/02 03:35:30
0 2024/02/02 03:35:59
The female spade it to big fo the male part here
The female spade it to big fo the male part here
0 2024/02/02 03:36:05
This side of the spade is ok as the female lug fits perfectly over the male.
This side of the spade is ok as the female lug fits perfectly over the male.
0 2024/02/02 03:39:58
This is the one I’m having problems with as the female lug is to big for the male part
This is the one I’m having problems with as the female lug is to big for the male part
0 2024/02/02 03:40:01
0 2024/02/02 06:03:16
0 2024/02/11 02:36:51
0 2024/02/11 02:41:29
0 2024/02/11 02:44:35
Total of 8 screws & plastic inserts
Total of 8 screws & plastic inserts
0 2024/02/11 04:20:37