Land Rover Forums - Land Rover Enthusiast Forum
0 2016/05/05 11:07:35
0 2016/05/05 11:07:49
0 2016/05/05 11:08:00
0 2016/05/05 11:08:07
0 2016/05/05 11:17:07
0 2016/05/05 11:17:08
0 2016/05/05 11:17:09
0 2016/05/05 11:17:11
0 2016/05/05 11:17:12
0 2016/05/05 11:17:13
0 2016/05/05 11:17:24
0 2016/05/05 11:17:37
0 2016/05/05 11:17:47
0 2016/05/05 11:18:01
0 2016/05/05 11:18:14
0 2016/05/05 11:18:22
0 2016/05/05 20:00:25
0 2016/05/06 20:13:26
0 2016/05/06 20:13:27
0 2016/05/06 20:13:28
0 2016/05/06 20:30:12
0 2016/05/06 20:30:14
0 2016/05/06 20:30:15
0 2016/05/07 11:52:52
0 2016/05/07 11:53:04
0 2016/05/07 11:53:15
0 2016/05/07 11:53:26
0 2016/05/07 11:53:36
0 2016/05/07 12:55:54
The metal ring around the bearing is fragile and bends very easily. Using 2 flat heads to pry out the bearing is a no go, unless you suggest the metal ring is unimportant. Still working out a solution with the tools I have... dont have any bolts small enough to screw into the small hole either.
The metal ring around the bearing is fragile and bends very easily. Using 2 flat heads to pry out the bearing is a no go, unless you suggest the metal ring is unimportant. Still working out a solution with the tools I have... dont have any bolts small enough to screw into the small hole either.
0 2016/05/10 13:24:26
0 2016/05/10 15:45:19
The rubber dust shield appears to be in good shape, I cleaned it up nicely.
The rubber dust shield appears to be in good shape, I cleaned it up nicely.
0 2016/05/10 15:45:30
0 2016/05/10 15:45:41
0 2016/05/10 15:45:49
0 2016/05/10 15:45:59
0 2016/05/10 15:46:09
0 2016/05/10 15:46:19
Prepped for paint
Prepped for paint
0 2016/05/10 15:46:28
First coating on shaft
First coating on shaft
0 2016/05/10 15:46:38
First coating on end pieces
First coating on end pieces
0 2016/05/10 15:46:47