Land Rover Forums - Land Rover Enthusiast Forum
0 2020/10/27 17:02:41
0 2020/09/11 11:56:02
0 2020/09/11 11:55:54
0 2020/09/11 11:55:40
0 2020/08/07 12:27:30
0 2020/07/23 16:15:38
0 2020/07/18 11:45:19
0 2020/06/23 16:24:34
0 2020/06/23 16:23:19
0 2020/06/11 16:49:29
0 2020/06/11 16:49:27
0 2020/06/09 16:44:48
0 2020/06/09 16:40:14
This is probably what the bottom of yours looks like.
This is probably what the bottom of yours looks like.
0 2020/05/25 04:34:26
0 2020/05/15 17:30:51
0 2020/05/15 17:27:42
0 2020/05/15 17:27:32
0 2020/04/09 18:42:34
0 2020/04/01 16:57:22
0 2020/03/10 18:03:45
0 2020/03/10 18:03:35
0 2020/03/10 18:03:27
0 2020/03/10 18:03:18
Motors typical seize due to water instrusion and rust.
Motors typical seize due to water instrusion and rust.
0 2020/02/23 11:32:02
Pull the motor apart, grease the armature, put it back together. Make sure to move the brush springs up to the loading position and push the brushes to the retracted position when loading the armature through the brush housing. Order of assembly is armature to brush housing, then assembly that subassembly to motor housing, than that to gearbox. Lube worm gear before going in to gearbox. You may have to use allen wrench to help fully seat worm gear by turning center of main gear.
Pull the motor apart, grease the armature, put it back together. Make sure to move the brush springs up to the loading position and push the brushes to the retracted position when loading the armature through the brush housing. Order of assembly is armature to brush housing, then assembly that subassembly to motor housing, than that to gearbox. Lube worm gear before going in to gearbox. You may have to use allen wrench to help fully seat worm gear by turning center of main gear.
0 2020/02/23 11:32:00
0 2020/02/23 11:31:58
Then seal the entire thing with silicone all over it.
Then seal the entire thing with silicone all over it.
0 2020/02/23 11:31:53
Then cover the hole with tape
Then cover the hole with tape
0 2020/02/23 11:31:44
Seal the drain cups with silicone top and bottom
Seal the drain cups with silicone top and bottom
0 2020/02/23 11:31:35
Remove this and seal it to the pan
Remove this and seal it to the pan
0 2020/02/23 11:31:25
I seal all the screw holes too.
I seal all the screw holes too.
0 2020/02/23 11:31:17
Once the pans are back in seal all the gaps/slots, holes in the pan.
Once the pans are back in seal all the gaps/slots, holes in the pan.
0 2020/02/23 11:31:11
0 2020/01/05 15:42:07
0 2020/01/05 15:41:59
0 2020/01/05 15:41:51
0 2020/01/05 15:41:45
0 2020/01/05 15:41:36
0 2020/01/05 15:41:30
0 2020/01/05 15:40:22
0 2020/01/05 15:40:18