Land Rover Forums - Land Rover Enthusiast Forum
0 2022/08/18 15:16:11
The other square head bolt that’ll allow coolant to drain out?
The other square head bolt that’ll allow coolant to drain out?
0 2022/08/17 12:47:57
Square head bolt that will allow coolant to drain from block? Also, what’s that sensor? I’ll clean it.
Square head bolt that will allow coolant to drain from block? Also, what’s that sensor? I’ll clean it.
0 2022/08/17 12:47:51
I think it’s the maroon pipe I’d want to pour water through to get debris to come out of the coolant ports?
I think it’s the maroon pipe I’d want to pour water through to get debris to come out of the coolant ports?
0 2022/08/17 12:47:47
0 2022/08/17 10:48:20
0 2022/08/17 10:48:08
0 2022/08/17 10:47:55
0 2022/08/17 03:50:54
0 2022/08/17 03:50:50
0 2022/08/16 22:53:06
0 2022/08/16 22:52:42
0 2022/08/16 22:52:31
0 2022/08/16 22:42:11
0 2022/08/16 22:41:58
0 2022/08/16 22:41:47
0 2022/08/16 14:40:32
0 2022/08/16 03:12:03
This is where I am in the job currently - removed timing chain, cleaned with diesel, shop towels, scotch brite
This is where I am in the job currently - removed timing chain, cleaned with diesel, shop towels, scotch brite
0 2022/08/15 23:16:10
Which sensor is this? It looks pretty oily - not sure if that’s causing issues. I can clean it with electronic contact cleaner.
Which sensor is this? It looks pretty oily - not sure if that’s causing issues. I can clean it with electronic contact cleaner.
0 2022/08/15 23:15:58
Trying to keep this clean, but might’ve got some dust in there. Any suggestions? Some sludgy oil from the sump got in right at the edges - I’ll try to get that out.
Trying to keep this clean, but might’ve got some dust in there. Any suggestions? Some sludgy oil from the sump got in right at the edges - I’ll try to get that out.
0 2022/08/15 23:15:45
Do these surfaces (engine block where it connects to sump) look pitted or is that the old gasket that left marks that just look like pitting? Any suggestion?
Do these surfaces (engine block where it connects to sump) look pitted or is that the old gasket that left marks that just look like pitting? Any suggestion?
0 2022/08/15 23:15:32
Anything I can safely spray up into the block to clean it a bit if needed? I’m trying to keep dust out, but some might have got in while doing all this.
Anything I can safely spray up into the block to clean it a bit if needed? I’m trying to keep dust out, but some might have got in while doing all this.
0 2022/08/15 23:15:21
Pretty clean here - used diesel, shop towels, scotch brite
Pretty clean here - used diesel, shop towels, scotch brite
0 2022/08/15 23:15:06
Stubborn bits of gasket
Stubborn bits of gasket
0 2022/08/15 23:14:56
0 2022/08/15 02:05:04
0 2022/08/13 13:04:18
0 2022/08/13 13:04:14
0 2022/08/13 13:04:10
0 2022/08/07 22:59:28
0 2022/08/05 12:54:40
0 2022/08/05 12:54:37
0 2022/08/05 12:54:35
0 2022/08/05 12:54:32
0 2022/08/05 10:19:41
0 2022/08/05 09:47:22
0 2022/08/05 09:44:26
0 2022/08/04 22:31:14
0 2022/08/04 22:31:07
0 2022/08/04 22:30:58
0 2022/08/04 22:30:49