Land Rover Forums - Land Rover Enthusiast Forum
0 2021/04/13 06:24:46
0 2021/04/13 06:24:38
0 2021/04/13 06:24:32
0 2021/04/13 06:24:28
having the control module out of the way of the top of the winch helped in load the rope --- I am happy to have decided to relocate it.
having the control module out of the way of the top of the winch helped in load the rope --- I am happy to have decided to relocate it.
0 2021/04/12 04:44:33
Next step is to route the manual control extension (which I placed inside the red conduit) to the outside (probably through the grill), as I reinstall the front plastics.
Next step is to route the manual control extension (which I placed inside the red conduit) to the outside (probably through the grill), as I reinstall the front plastics.
0 2021/04/12 04:44:30
control module components are mounted in front and lower to the switch
control module components are mounted in front and lower to the switch
0 2021/04/12 04:44:20
Switch is in the center of the photo. Negative line to the winch runs to the jump start post and positive taps in under the black fuse box rear of the positive jump start post
Switch is in the center of the photo. Negative line to the winch runs to the jump start post and positive taps in under the black fuse box rear of the positive jump start post
0 2021/04/12 04:44:15
see the front corner 2 in square receptacles --- 90 degrees to the same feature in the other photo. Ready for the vertical U bar
see the front corner 2 in square receptacles --- 90 degrees to the same feature in the other photo. Ready for the vertical U bar
0 2021/04/08 12:04:06
Ready for the roo bar
Ready for the roo bar
0 2021/04/08 12:04:04
0 2021/04/08 12:00:34
0 2021/04/08 12:00:31
These are the post-cut to be used pieces
These are the post-cut to be used pieces
0 2021/04/06 04:28:15
0 2021/04/06 04:26:12
I decided to keep the camera in its current location, which is possible with the winch control module remote. Manual clutch handle is on the right.
I decided to keep the camera in its current location, which is possible with the winch control module remote. Manual clutch handle is on the right.
0 2021/04/06 04:26:06
These are the leftover pieces which are going into the trash
These are the leftover pieces which are going into the trash
0 2021/04/06 04:26:00
0 2021/04/04 15:10:17
0 2021/04/04 15:10:13
0 2021/04/04 15:10:05
0 2021/04/04 07:47:05
0 2021/04/04 07:46:57
0 2021/04/04 07:46:55
0 2021/04/03 05:19:49
0 2021/04/03 05:19:46
0 2021/04/02 05:11:38
Winch tray is in !
Winch tray is in !
0 2021/04/02 05:11:35
0 2021/04/01 03:09:54
0 2021/04/01 03:09:50
0 2021/04/01 03:09:42
Day 3 Starting point
Day 3 Starting point
0 2021/03/30 12:04:51
0 2021/01/12 04:38:02
0 2021/01/12 04:37:40
0 2021/01/12 04:37:07
0 2020/12/11 06:21:56
0 2020/12/11 06:21:32
0 2020/12/11 06:21:08
0 2020/12/11 06:20:14